The MG400 Sliding Rail Kit puts the Dobot MG400 Desktop Robotic Arm on a linear axis. The arm reaches 440 mm from its base; mounted on the rail it travels another 800 mm along a line, so one MG400 serves several fixtures, trays or machines set out side by side. Dobot supplies it under part number 1200000033.
The kit is a linear module with its own servo motor and servo driver. The carriage carries up to 20 kg, far more than the 8 kg arm, moves at up to 800 mm/s with up to 1600 mm/s² of acceleration, and repeats to ±0.1 mm. A 20 mm lead screw drives it, and a drag chain carries and protects the cables as the arm travels.
Control runs over Modbus TCP, the same protocol the MG400 already speaks, so the rail position is part of the robot program rather than a separate system. The drive draws 200 W.
The rail measures 1150 × 230 × 90 mm and weighs 15 kg. It is rated IP20, a clean, dry indoor axis for a bench, a lab or a teaching cell, and a full set of hex keys comes with it for assembly.
Key Capabilities
-
800 mm of extra travel: The rail moves the MG400 another 800 mm along a line, beyond the arm's own 440 mm reach.
-
20 kg carriage payload: The carriage is rated for 20 kg, comfortably above the 8 kg MG400.
-
800 mm/s and ±0.1 mm: The axis travels at up to 800 mm/s, accelerates at up to 1600 mm/s² and repeats to ±0.1 mm.
-
Servo-driven linear module: A servo motor and servo driver on a 20 mm lead screw move the carriage.
-
Modbus TCP control: The rail is commanded over Modbus TCP, so its position becomes part of the robot program.
-
Cables kept tidy: A drag chain carries and protects the cables as the arm travels along the rail.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation. On-site installation is not included in the product price.