The MG400 Soft Gripper Kit is a pneumatic end tool for the Dobot MG400 Desktop Robotic Arm. Its flexible fingers wrap around an object the way an octopus tentacle closes on its prey, instead of pinching it between hard jaws, so fruit, baked goods, cloth, pouches and parts with delicate surfaces are picked without bruising or scratching. Dobot supplies it under part number 1200000025.
One kit covers several jobs. The soft finger gripper carries four flexible fingers and is set up with two, three or four of them, sliding mounting plates move the fingers closer together or further apart, and four soft beaks in different sizes add options for small pieces. Two fingers suit flat or long items, three centre round items, four give the most contact on larger or irregular shapes, and the smallest beak handles very small, light parts.
The fingers work on air. Positive pressure closes them, negative pressure opens them wide for release, and the pressure level sets how firmly they hold. The finger gripper connects through a 4 mm air hose, repeats to 0.05 mm, runs at up to 300 cycles a minute and is rated for 3 million cycles at a safe working pressure of 120 kPa. It needs an air source that supplies both positive and negative pressure, and the Dobot Mini Vacuum Pump Box is a compact match for the MG400.
Soft grippers are for light items. Dobot rates the four soft beaks at 60 g, 15 g, 50 g and 30 g, and the MG400 carries 500 g rated (750 g at maximum) including the tool, so test your own items before settling on a setup. For unpackaged food, check the material and hygiene requirements of your process.
Key Capabilities
-
Wrap-around grip: The flexible fingers curl around the object and spread the contact over a larger area, so soft or fragile surfaces are not dented or bruised.
-
Two, three or four fingers: The finger gripper takes two, three or four of its four fingers, to match flat, round or irregular items.
-
Four soft beaks: Beaks 1 to 4 come in different sizes and are rated at 60 g, 15 g, 50 g and 30 g, for smaller and lighter pieces.
-
Adjustable finger spacing: Sliding mounting plates move the fingers closer together or further apart when a new item comes to the cell.
-
Grip set by air pressure: Positive pressure closes the fingers, negative pressure opens them wide, and the pressure level sets the gripping force.
-
Fast desktop cycles: The gripper repeats to 0.05 mm at up to 300 cycles a minute, in step with the MG400's quick pick and place work.
-
Made for the MG400: The kit is built for the Dobot MG400 desktop arm, which is sold separately.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation. On-site installation is not included in the product price.