The PGC-50-35 is a collaborative electric parallel gripper made by DH Robotics and supplied by Dobot for its cobots under part number 1200000254. It bolts to the robot flange, takes its power and signals through the tool connector and carries its drive controller inside the body, so a cell needs no separate gripper controller and no compressed air.
Each jaw grips with 15 to 50 N, set by the program, across a 37 mm stroke, and DH Robotics recommends workpieces up to 1 kg. A precision planetary reducer with rack and pinion drives the jaws, which open and close in 0.7 s each way and repeat to ±0.03 mm. The jaws keep hold of the part if power is lost, which keeps a cell safe through stops and outages.
Of the two small DH parallel grippers Dobot supplies, it is the better protected one: rated IP54 against dust and splashing, at 124 × 63 × 63 mm and 0.5 kg, for machine tending, assembly and handling in ordinary workshop conditions. Modbus RTU over RS485 and digital I/O are standard, with TCP/IP, USB 2.0, CAN 2.0A, PROFINET and EtherCAT as options.
Next to the slim PGEA-50-26, which has the same force range, the PGC-50-35 trades speed for protection and travel: a wider stroke and IP54 instead of IP40, against the PGEA's quicker cycles. For round or irregular parts up to 3 kg, the adaptive AG-95 is the better fit.
Key Capabilities
-
Plug and play on cobots: The drive controller is built into the gripper, so it mounts on the flange and runs without an external controller or air supply.
-
15 to 50 N per jaw: Gripping force is set in software, gentle for fragile parts and firm for solid ones, for workpieces up to 1 kg.
-
37 mm stroke: The jaws open wider than slim 26 mm grippers, so one cell handles a wider range of part sizes.
-
Holds on power loss: The jaws keep the workpiece when power drops, so parts are not released during stops.
-
IP54 protection: The body resists dust and splashing in normal workshop and machine-tending conditions.
-
Standard industrial control: Modbus RTU over RS485 and digital I/O are standard, with TCP/IP, USB 2.0, CAN 2.0A, PROFINET and EtherCAT as options.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation. On-site installation is not included in the product price.