The AG-95 is a linkage-type adaptive electric gripper made by DH Robotics and supplied by Dobot for its collaborative robots under part number 1200000255. Instead of pinching a part between two flat jaws, its linked fingers close around the workpiece and follow its outline, which gives a stable hold on round, spherical and irregular objects.
That makes it the gripper for mixed work. Bottles, tubes, fruit, castings, turned blanks and packaged goods of changing shapes are picked without swapping fingertips. The stroke opens to 95 mm, wide enough for housings and boxes that small parallel grippers cannot take, and each jaw grips with 45 to 160 N for workpieces up to 3 kg.
The drive controller is built in. Modbus RTU over RS485 and digital I/O come as standard, with TCP/IP, USB 2.0, CAN 2.0A, PROFINET and EtherCAT as options, on 24 V DC at 0.8 A rated and 1.5 A peak. The jaws open and close in 0.9 s each way and repeat to ±0.03 mm, and the body is rated IP54 and runs below 50 dB.
The AG-95 weighs 1 kg and measures 184.6 × 162.3 × 67 mm, so count it in the robot's payload with the part. For small regular parts under 1 kg, the lighter PGC-50-35 or PGEA-50-26 parallel grippers are the simpler choice.
Key Capabilities
-
Envelope adaptive grasping: The linked fingers close around the workpiece and follow its shape, holding round and irregular parts securely.
-
One gripper, many parts: Mixed shapes and sizes are picked without changing fingertips, which suits cells with a changing product mix.
-
95 mm stroke: The wide opening takes bottles, boxes and housings that small parallel grippers cannot.
-
45 to 160 N per jaw: Force is set in software, strong enough for parts up to 3 kg and gentle enough for delicate items.
-
Built-in controller: Modbus RTU and digital I/O are standard, with PROFINET, EtherCAT and other fieldbuses as options.
-
IP54 protection: The gripper resists dust and splashing in ordinary factory and lab conditions.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation. On-site installation is not included in the product price.