A cobot fixed to one bench serves only the machines it can reach. Put the same cobot on an autonomous base and it tends several machines, collects parts from a store and delivers them to the line. Dobot calls this combination an Autonomous Mobile Manipulation Robot (AMMR), and the AMB-400-CE is the 400 kg mobile base for it. This configuration, part number 1300000856, is the base on its own, without a robotic arm and without a charging station.
The base maps the site with its laser scanners and localises itself by laser SLAM, so it drives between stations without floor tape, magnets or reflectors. It reaches ±5 mm navigation accuracy and ±2 mm relative positioning, close enough for a mounted cobot to start its task with little correction, and travels at up to 1.5 m/s. Accuracy and runtime depend on the site, the load and the duty cycle.
A rated payload of 400 kg leaves room for a collaborative robot, its controller, a gripper and the parts or totes it carries. Power comes from a built-in 48 V, 46 Ah lithium iron phosphate battery rated for about 6 hours. The base measures 960 × 642 × 750 mm without an arm.
Buying the base alone lets an integrator choose the arm, end effector, upper structure and charging method, or reuse arms already on site. Dobot builds its AMMR with CR series cobots. The automatic charging station, any upper mechanism or cargo fixture, mapping and site setup are not included; plan charging for your shifts, check floor flatness, gaps, slopes and aisle widths along the route, and carry out a risk assessment for the complete mobile manipulator.
Key Capabilities
-
Laser SLAM navigation: The base maps the site and localises itself, driving between stations without tape, magnets or reflectors.
-
±5 mm accuracy: Navigation accuracy of ±5 mm and ±2 mm relative positioning bring a mounted cobot close to its station.
-
400 kg rated payload: Room for a collaborative robot, its controller, a gripper and the parts or totes it carries.
-
About 6 hours per charge: A 48 V, 46 Ah lithium iron phosphate battery powers the base.
-
Up to 1.5 m/s: The base travels at up to 1.5 m/s between stations.
-
Open to your design: Supplied without arm or charger, so the integrator chooses the cobot, top structure and charging method.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation. On-site installation is not included in the product price.