The Mini Vacuum Pump Box, which Dobot also calls the Mini Air Pump Box, is a portable, plug-and-play air source for pneumatic end tools on the Dobot MG400 Desktop Robotic Arm. It sits beside the arm and feeds a suction cup or a soft gripper through a 4 mm hose, so a desktop cell runs without compressed-air lines or a pneumatic circuit designed for it. Dobot part number 1200000029.
Its pressure range runs from -70 to 110 kPa, so the one box supplies vacuum for suction picking and positive pressure as well. That covers the MG400 Vacuum Suction Cup Kit and the MG400 Soft Gripper Kit, whose fingers close on positive pressure and open on negative pressure.
It works in two modes. In manual mode it runs from the box itself, and in I/O mode the robot switches it as part of a program. It takes 24 V DC ±10% at 0.8 A rated and 1.2 A at peak, measures 163 × 143 × 53 mm, weighs 800 g and runs at about 65 dB.
The box is rated IP20, so it belongs on a clean, dry bench or in an enclosure, the same setting as the MG400 itself. Because it is self-contained, the whole cell can be moved between benches, classrooms or lines without re-plumbing.
Key Capabilities
-
Plug-and-play air source: The box supplies the air for a pneumatic end tool without compressed-air lines or a purpose-built pneumatic circuit.
-
Vacuum and positive pressure: A range of -70 to 110 kPa covers suction picking as well as tools that need both pressures, such as the MG400 Soft Gripper Kit.
-
Manual or I/O control: It runs on its own in manual mode, or the robot switches it through I/O as part of a program.
-
Compact and light: At 163 × 143 × 53 mm and 800 g it sits on the bench next to the arm.
-
4 mm hose connector: End tools connect through a 4 mm air hose, the same size as the MG400 suction and soft gripper kits.
-
Moves with the cell: Being self-contained, the box goes wherever the desktop cell goes.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation. On-site installation is not included in the product price.