The Unitree G1 EDU Combat, also called the G1 EDU Boxing Edition, is the G1 humanoid prepared for robot boxing and kickboxing, and the configuration behind Unitree's Iron Fist King boxing events. It differs from a standard G1 where fighting punishes the robot: a reinforced waist built on the IM6010-R32 motor configuration and upgraded arm hardware, for better durability, impact resistance and stability through aggressive, high-dynamic motion.
It comes ready for the ring, with boxing gloves and a helmet included and dedicated combat motions: straight punches, hooks, kicks and knees, with the balance to throw them and recover from impacts and knockdowns. In tournament play the robots are driven by low-latency remote control, and voice and motion-sensing control are also supported.
Underneath, the full EDU research platform stays intact, and the robot can also work as a G1 EDU Plus system. An 8-core control CPU is paired with an NVIDIA Jetson Orin NX delivering 100 TOPS, with LIVOX 3D LiDAR, an Intel RealSense depth camera, a four-microphone array and an IMU, plus ROS support, SDKs, APIs and frameworks for imitation and reinforcement learning. It stands 1.32 m, weighs about 35 kg, develops up to 120 N·m at the knee, walks at 2 m/s and runs about two hours on a 9,000 mAh quick-swap battery.
Two points separate it from the other G1 models in our catalogue. The G1-Boxing Iron Fist King, offered by quotation, covers Unitree's boxing showcase; this is the Combat Edition hardware itself. And Unitree supports the Combat Edition with a repair support subsidy instead of the standard free warranty, because the robot is built and bought to take hits. The subsidy terms and the edition's total joint count are confirmed in writing with your quotation.
Key Capabilities
-
Reinforced Waist and Arms: The waist is built on the IM6010-R32 motor configuration and the arm hardware is upgraded, for durability and stability under repeated impacts.
-
Dedicated Combat Motions: Straight punches, hooks, kicks and knees are executed with the balance to throw them and to recover from knockdowns.
-
Gloves and Helmet Included: The package ships with boxing gloves and a helmet for exhibitions, sparring practice and motion testing.
-
Three Ways to Command It: Low-latency remote control drives tournament bouts, and voice and motion-sensing control are also supported.
-
Full EDU Research Platform: ROS support, SDKs and APIs for imitation and reinforcement learning remain, and the robot can also work as a G1 EDU Plus system.
-
Jetson Orin NX on Board: An 8-core control CPU is paired with an NVIDIA Jetson Orin NX delivering 100 TOPS, fed by LIVOX 3D LiDAR, an Intel RealSense depth camera and an IMU.
-
Repair Support Subsidy: Unitree covers this edition with a repair support subsidy in place of the standard free warranty, with the terms confirmed at quote.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide, covered by Unitree's repair support subsidy for this edition rather than the standard warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
