Precio medio diario
Importes en USD
Robotis - LIPO Battery 11.1V 1000mAh LB-011
Robotis · LIPO Battery 11.1V 1000mAh LB-011
£28,58
Descripción
Characteristics Battery for DARwIn-OP only. PCM is embedded to protect from overcharging, discharge, and excess current. Can not be used with the BIOLOID due to connector difference. Battery case/cover and extension cable not included. What's included 1 x LIPO Battery 11.1V 1000mAh LB-011**Charger sold separately. Specifications Weight 83g Dimension 70 x 35 x 15mm Voltage 11.1V Capacity 1000mAh Etc. PCM Embedded (Protection from overcharging, discharge, and excess current) Precautions Do not drop or fold any part of the battery or cables. Do not fold the end of the sutured portion. Do not apply heat, water, or any other liquid on the battery. Do not place it in the microwave, washing machine, or dryer. Do not use damaged batteries. (inflated, deformed, damaged, etc) Do not short circuit the polarity. Do not take the battery apart. When charging, make sure the battery is connected into the correct polarity. Do not charge when the battery is hot. Please charge after it has cooled off. Battery will not charge when connected to the robot. * When the battery is not being used or fully charged, please do not have it connected to a device. STORAGE PRECAUTIONS: Detach the battery from the robot or controller when storing away. When storing away the battery for a long time, make sure the battery life is somewhere around 50%. Do not store it in wet or hot places. ** The warranty for the LIPO 11.1V Battery Set LBS-11 is 6 months. Compatible products Robot : DARwIn-OP Charger : LIPO Battery Charger LBC-10 ** NOT compatible with CM-series controllers. LiPo Battery for DarwinOP and RobotisOP humanoid robots
Characteristics Battery for DARwIn-OP only. PCM is embedded to protect from overcharging, discharge, and excess current. Can not be used with the BIOLOID due to connector difference. Battery case/cover and extension cable not included. What's included 1 x LIPO Battery 11.1V 1000mAh LB-011**Charger sold separately. Specifications Weight 83g Dimension 70 x 35 x 15mm Voltage 11.1V Capacity 1000mAh Etc. PCM Embedded (Protection from overcharging, discharge, and excess current) Precautions Do not drop or fold any part of the battery or cables. Do not fold the end of the sutured portion. Do not apply heat, water, or any other liquid on the battery. Do not place it in the microwave, washing machine, or dryer. Do not use damaged batteries. (inflated, deformed, damaged, etc) Do not short circuit the polarity. Do not take the battery apart. When charging, make sure the battery is connected into the correct polarity. Do not charge when the battery is hot. Please charge after it has cooled off. Battery will not charge when connected to the robot. * When the battery is not being used or fully charged, please do not have it connected to a device. STORAGE PRECAUTIONS: Detach the battery from the robot or controller when storing away. When storing away the battery for a long time, make sure the battery life is somewhere around 50%. Do not store it in wet or hot places. ** The warranty for the LIPO 11.1V Battery Set LBS-11 is 6 months. Compatible products Robot : DARwIn-OP Charger : LIPO Battery Charger LBC-10 ** NOT compatible with CM-series controllers.
Historial de precios
Historial del precio medio
Un punto de datos por día, calculado según la fecha de observación.
$37,77
Los promedios se calculan por día UTC a partir de todos los precios de oferta registrados.
Anuncios relacionados
LIPO Battery 11.1V 1000mAh LB-011
Robotis
$32,89
DYNAMIXEL XL-320
Robotis
$30,94
Passive IR Sensor PIR-10
Robotis
$29,67
Robot Cable-X4P 240mm (10pcs)
Robotis
$25,99
Servo Motor SM-10
Robotis
$27,37
DYNAMIXEL XL430-W250-T
Robotis
$27,50
DYNAMIXEL Shield
Robotis
$27,49
Robot Cable-WP 1000mm (Basic Cable)
Robotis
$27,26
DYNAMIXEL XL330-M288-T
Robotis
$27,49
DYNAMIXEL XL330-M077-T
Robotis
$27,49
Dynamixel XL430-W250-T Servo
Robotis
36 €
Dynamixel XL430-W250-T
Robotis
£22,67