A robot that follows a fixed path cannot tell whether it is pressing too hard, whether a peg has found its hole or whether someone is pushing on the arm. The Kunwei KWR75B gives a Dobot cobot that sense of touch. It is a compact six-axis force torque sensor that fits between the robot flange and the tool and measures the forces and torques acting on the tool in every direction. Dobot supplies it under part number 2100000409.
It measures force along X, Y and Z up to 200 N and torque about the same three axes up to 8 N·m. Accuracy is 0.5% of full scale, repeatability 0.2% and the smallest resolution 0.03%, and the sensor withstands overloads up to 300% of its range. Each unit is calibrated across all six axes together, which suppresses crosstalk between them, and the data collection and calculation electronics are built into the body, so it outputs ready-to-use force and torque values.
At 75 mm across, 31.5 mm high and 0.28 kg in anodised aluminium alloy, it takes little of the robot's payload and adds little length to the tool. Force functions are set up from Dobot's own software: DobotStudio Pro 2.3.0 or later, or SCStudio for Android 4.8.0 or iOS 2.9.0 or later, with the Dobot+ ForceTorqueSensor plug-in.
Typical jobs are drag-to-teach, polishing, grinding and cutting at constant contact force, precision insertion, automated testing of buttons and screens in consumer electronics, vehicle and medical device testing, and contact detection at the tool. The tool hangs below the sensor, so its weight and lever arm count toward the 200 N and 8 N·m ranges. The communication version, cable and adapter flange for your robot are confirmed before the order.
Key Capabilities
-
Six axes in one sensor: Force along three axes and torque about the same three axes are measured at once, so the robot knows how hard and in which direction the tool is loaded.
-
200 N and 8 N·m: The KWR75B covers 200 N of force and 8 N·m of torque on each axis, with 300% overload capacity.
-
Six-axis joint calibration: All six axes are calibrated together, which suppresses crosstalk and gives cleaner readings.
-
Built-in signal processing: Data collection and calculation electronics inside the body output ready-to-use force and torque values.
-
Light and compact: At 0.28 kg and 31.5 mm high, the sensor takes little payload and adds little tool length.
-
Dobot software support: The Dobot+ ForceTorqueSensor plug-in brings the sensor into DobotStudio Pro and the SCStudio apps.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation. On-site installation is not included in the product price.