The BrainCo Revo 3 U21T is the touch-sensing build of BrainCo's 21-degree-of-freedom Revo 3 dexterous robotic hand, offered here for the Unitree H2 EDU PLUS humanoid together with an SHF3L sensing camera. What it adds over the plain U21 is a tactile array across the whole palm.
That array measures from 0 to 25 N at 0.01 N resolution and registers pressure, contact events and incipient slip. Instead of assuming an object is secure once the fingers close, a controller can read where the object presses, notice the first movement and raise or lower grip force at the hand's 500 Hz control rate. Unitree builds its H2-D Ultimate K around the same tactile hand.
The U21T suits grasp-stability studies, slip-aware controllers and touch-conditioned learning, as well as contact-rich assembly tasks such as insertion, fastening and part seating. Its mechanics are the full Revo 3: direct-drive, backdrivable joints with five degrees of freedom in the thumb and four per finger, a 70 N five-finger grip, a 20 N pinch, a 20 kg payload and 3 Hz open-close speed. The SHF3L camera adds 1920 × 1536 video at 30 fps across a 196° horizontal view.
If palm touch is enough, the U21T is the simpler choice over the U21V visuo-tactile hand + SHF3L, which adds fingertip vision; without touch, the U21 + SHF3L carries the same hand mechanics. BrainCo's U21T is also offered for the H2 EDU as the Revo 3 U21T Tactile Dexterous Hand. Compare them with our other dexterous robotic hands.
Key Capabilities
-
Touch across the whole palm: A tactile array covers the palm and maps where and how hard an object presses, from 0 to 25 N.
-
0.01 N resolution: The array reports contact events and incipient slip, the first sign that a held object is starting to move.
-
Grip adjusted by feel: A controller can confirm each grasp from the palm data and raise or lower force at 500 Hz instead of assuming the object is secure.
-
21 direct-drive joints: The thumb has five degrees of freedom and each finger four, all backdrivable, with 0.1° repeatability.
-
70 N grip, 20 kg payload: A fingertip pinch reaches 20 N and the hand opens and closes at 3 Hz.
-
SHF3L camera included: The camera adds 1920 × 1536 video at 30 fps across a 196° horizontal field of view, at under 50 g.
-
Touch without fingertip vision: Leaving out the U21V's fingertip vision sensors keeps calibration and compute simpler for projects that need touch alone.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.