The Ultimate edition is the highest of the three Dex1-1 configurations. The gripper underneath is the same two-finger parallel jaw Unitree publishes one specification for: 90 mm of stroke, an 80 mm jaw, gripping force adjustable from 5 N to 120 N, speed from 50 mm/s to 375 mm/s and 0.1 mm fingertip position resolution.
Be clear about what is and is not published. Unitree's own specification sheet lists two versions of the Dex1-1, a standard one and a camera-equipped one, and it details the 1080p RGB camera at 30 or 60 frames per second with a 118° by 87° field of view. It does not publish a separate figure set for an Ultimate package, so the exact camera, depth-sensing and bracket complement in this configuration is confirmed in writing before the order rather than estimated here.
For a buyer the practical reading is this: all three editions grip identically, and what you are choosing is how much perception hardware arrives bolted to the jaw. The Standard edition arrives without a camera, the Advanced edition with the RGB camera, and the Ultimate edition is the fullest package of the three.
The electrical and control picture is unchanged across the range: 24–64 V operation with 24 or 48 VDC recommended, a -20 °C to 60 °C operating range, high-speed RS-485 at 6 Mbps, a 1000 Hz control frequency, a 5 N·m peak-torque motor through a 1:25 reduction and a 15-bit absolute encoder.
Key Capabilities
-
The fullest Dex1-1 package: Ultimate is the top of the three configurations, with more perception hardware on the jaw than the Standard or Advanced editions.
-
Same gripping mechanism as the rest of the range: Unitree publishes one mechanical specification for the Dex1-1: a 90 mm stroke on an 80 mm jaw with 5 N to 120 N of adjustable force.
-
Sensor complement confirmed in writing: Unitree does not publish a separate figure set for the Ultimate package, so we establish the exact camera and depth-sensing fit before you order.
-
20 kg form-fitting load: A form-fitting horizontal grasp is rated to 20 kg and a vertical friction grasp to 5 kg on a square steel block.
-
1000 Hz control, 15-bit absolute encoder: High-speed RS-485 at 6 Mbps carries angle, velocity, torque and temperature feedback with 0.1 mm fingertip position resolution.
-
Wide supply and temperature range: The gripper runs on 24 to 64 V across a -20 °C to 60 °C operating range, with 24 or 48 VDC recommended.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.