What separates the Advanced edition of the Dex1-1 from the Standard one is a camera. Unitree publishes the gripper in two versions, with and without it, and this is the version with it: a 1080p RGB camera running at 30 or 60 frames per second with a 118° horizontal, 87° vertical and 140° diagonal field of view.
That matters for manipulation research. An eye-in-hand camera sees the object at the moment of contact rather than from across the room, which is what visual servoing, grasp-pose estimation and imitation-learning pipelines generally want. The jaw underneath is unchanged: 90 mm of stroke, an 80 mm jaw, gripping force adjustable from 5 N to 120 N and speed from 50 mm/s to 375 mm/s, with fingertip position resolved to 0.1 mm.
Load ratings are the same across the Dex1-1 range — 20 kg on a form-fitting horizontal grasp, 5 kg on a vertical friction grasp — as are the electrical figures: 24–64 V operation, high-speed RS-485 at 6 Mbps and a 1000 Hz control frequency. So the decision between Standard and Advanced is simply whether you want the camera on the gripper.
A second Advanced-edition entry for the Dex1-1 is also carried, covering a single H2-dedicated unit. Unitree publishes one Advanced specification, so no published figure separates the two entries; which of them suits an order is settled with the quotation.
Key Capabilities
-
1080p RGB camera on the gripper: The camera runs at 30 or 60 frames per second with a field of view of 118° horizontal, 87° vertical and 140° diagonal.
-
The only published difference from the Standard edition: Unitree lists the Dex1-1 in two versions and the camera is what distinguishes them; the jaw, stroke, force range and electronics are identical.
-
Built for eye-in-hand manipulation: Seeing the object at the point of contact is what visual servoing and imitation-learning pipelines need, and a head camera cannot provide it.
-
90 mm stroke, 5 N to 120 N adjustable grip: An 80 mm jaw closes the full stroke in as little as 0.24 s, with fingertip position resolved to 0.1 mm.
-
20 kg form-fitting load: Form-fitting horizontal grasps are rated to 20 kg and friction grasps to 5 kg vertically on a square steel block.
-
1000 Hz control over high-speed RS-485: The 6 Mbps bus carries angle, angular velocity, torque and temperature feedback alongside stiffness and damping commands.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.