The Linkerbot Linker Hand L20 Pro is a five-finger dexterous robotic hand with 21 degrees of freedom, 16 of them motor-driven, built for humanoid robots, cobots and embodied-AI research. Pro marks the full L20: unlike the 10-active-joint L20 Lite, it drives the fingertip joint of every digit as well as the base and sideways movement of each finger. It weighs about 1,200 g and is made as a left or a right hand.
Linkerbot builds the L20 around its own joint modules, with brushless motors and precision ball screws moving the fingers through linkages under closed-loop position and torque control. The result is a 100 N five-finger grip, 20 N at each fingertip and 15 N at the thumb, a 20 kg rated load and ±0.20 mm repeatability. The fingers bend at 3.5 rad/s and the thumb swings sideways at 3.2 rad/s, through 75.78° of thumb rotation and 69.9° of finger bend.
The hand connects over CAN or RS-485 and runs on DC 24–48 V, drawing 0.3 A at rest and 1.8 A at most, and Linkerbot rates it for 24-hour continuous operation on 24 V industrial power. Its Windows and Ubuntu host software, Python, ROS and ROS 2 SDKs and URDF model cover teleoperation, imitation learning and simulation, and Linkerbot's grasp-learning tools for the L20 run in Isaac Gym. Linkerbot aims it at research and education, industrial automation, and 3C electronics, automotive and aerospace manufacturing.
Within the range, the Linker Hand L10 Standard has 10 active joints at about 750 g, and the Linker Hand L30 Cable-Driven moves 17 active joints through tendons. Compare all our dexterous robotic hands.
Key Capabilities
-
16 active joints, fingertips included: Motors drive the thumb in three axes, the base and sideways spread of every finger and the fingertip joint of all five digits, 21 degrees of freedom in all.
-
100 N grip, 20 kg rated load: The five fingers grip with 100 N, each fingertip pushes with 20 N and the thumb with 15 N, and Linkerbot rates the load at 20 kg.
-
Ball-screw joint modules: Brushless motors and precision ball screws in Linkerbot's own joint modules give closed-loop position and torque control that repeats to ±0.20 mm.
-
Fast finger motion: The four fingers bend at 3.5 rad/s (200.47°/s) and the thumb swings sideways at 3.2 rad/s (193.59°/s).
-
24-hour duty on 24 V: A 0.3 A static current and a DC 24–48 V input let the hand run around the clock on standard industrial power.
-
Python, ROS 2 and simulation: Linkerbot's Python, ROS and ROS 2 SDKs, a URDF model and its grasp-learning tools for the L20 in Isaac Gym bring the hand into existing robot stacks.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.