The Elephant Robotics myGripper H100 Left (part number 4010700101) is the left-hand version of Elephant Robotics' three-finger dexterous robotic hand, supplied as a single unit. It is made for the myCobot Pro 630 and the Mercury series and is the hand to choose when the arm you are equipping works on the left, such as the left arm of a two-armed setup.
It is built for research, teaching and laboratory demonstrations. Three fingers, placed like a human thumb, index and ring finger, move through six joints, each on its own digital servo with current, position and speed control. A program picks each joint's angle, speed and torque on a 0–100 scale, which suits fruit, food, tools and laboratory items as well as gestures and greetings when the robot works with people. It holds 500 g at rated load across a 0–130 mm gripping range.
Grasp status arrives at 100 Hz over RS-485 and tells the controller whether the hand is moving, has stopped, has clamped an object or has dropped it. An ESP32 dual-core chip controls the hand, the serial protocol is open, and Elephant Robotics' Python library adds preset gestures and PID tuning, with ROS and RViz simulation supported. The hand weighs 780 g, takes 24 V at 2 A through an M8 8-pin cable and is rated for 100,000 cycles or more.
Bought alone, it covers one arm. With the myGripper H100 right hand, or as the myGripper H100 Left + Right pair, it equips both sides; apart from the side, the two hands share one specification. Other makers are in our dexterous robotic hands.
Key Capabilities
-
Single left hand: Part number 4010700101 equips one left-side arm, or the left arm of a dual-arm robot.
-
Thumb, index and ring positions: Three fingers placed like a human thumb, index and ring finger move through six servo joints.
-
Made for lab objects and tools: Elephant Robotics designed it for fruit, food, tools and laboratory items, and for gestures such as a wave or a greeting.
-
Knows when an object drops: Grasp status reads moving, stopped, clamped or dropped at 100 Hz over RS-485.
-
Python control on a 0–100 scale: Each joint's angle, speed and torque are set from 0 to 100, with preset gestures and PID tuning in the same library.
-
780 g on 24 V: The hand weighs 780 g, takes 24 V at 2 A through an M8 8-pin cable and screws onto the arm.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.