This listing is a pair: one left and one right Elephant Robotics myGripper H100, the three-finger dexterous robotic hand Elephant Robotics builds for its myCobot Pro 630 and Mercury series robots (part number 4010700098). A pair is what a two-armed setup needs, such as a dual-arm Mercury or two Pro 630 arms working side by side.
Each hand has three fingers, in the positions of a human thumb, index and ring finger, moved through six joints by six digital servo motors. Every servo supports current, position and speed control, so a grasp is set by output torque, motion speed and absolute position rather than simply opened and closed. Each hand holds 500 g at rated load across a 0–130 mm gripping range, moves its joints at 60° per second and weighs 780 g.
The H100 is made for research and teaching. Each hand reports its grasp status at 100 Hz over RS-485 — moving, stopped, object clamped or object dropped — which makes the pair useful for collecting two-handed motion data for imitation and reinforcement learning. Elephant Robotics' Python library sets each joint's angle, speed and torque on a 0–100 scale and calls preset gestures, ROS with RViz covers simulation, and the serial protocol is open. Grasp modes include single-finger press, two-finger pinch, two-finger clamp and three-finger grasp, alongside gestures such as a thumbs-up or a wave.
Each hand takes 24 V at 2 A through an M8 8-pin cable, runs on an ESP32 dual-core controller, screws onto the arm and is rated for 100,000 cycles or more. For one arm, the myGripper H100 right hand and the myGripper H100 left hand are sold singly; for other designs, see our dexterous robotic hands.
Key Capabilities
-
Left and right in one order: Two hands, one of each side, equip both arms of a dual-arm Mercury or two myCobot Pro 630 arms working side by side.
-
Six servo joints per hand: Each hand moves a thumb and two fingers through six joints, each on its own digital servo with current, position and speed control.
-
Grasp status at 100 Hz: Each hand reports whether it is moving, has clamped an object or has dropped one, read in real time over RS-485 for motion-data collection.
-
500 g per hand, 0–130 mm: Each hand holds 500 g at rated load across a 0–130 mm gripping range, with angle, speed and torque set per joint.
-
Four grasp modes and gestures: Single-finger press, two-finger pinch, two-finger clamp and three-finger grasp, plus gestures such as a thumbs-up or a wave.
-
Python, ROS and an open protocol: Elephant Robotics' Python library sets angles, speed, torque and gestures, ROS and RViz cover simulation, and the serial protocol is open for your own code.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.