The X-Trainer exists to answer one problem in robot learning: where the data comes from. An operator holds two master hands, the two six-axis slave arms copy the motion, and the platform records the task as it is performed — joint angles, gripper state and RGB and depth imagery — so a policy can be trained on examples captured in the robot's own body rather than in simulation.
The arms are Dobot Nova 2 cobots: 625 mm reach each, a 1,200 mm dual-arm working range, ±0.05 mm repeat positioning, 2 kg payload single-arm and 3 kg across both, and up to 1.6 m/s. The master hands keep loads under 400 g with 3D-printed monolithic joints and a spring-assisted chassis, and carry unlock and record buttons so the operator starts and stops a capture without leaving the rig. The master-to-slave motion interface runs at 25 Hz end to end.
Safety is designed around the fact that a human is driving. Master and slave arms de-synchronise automatically on power loss or an alarm, the master hand is monitored for being dropped, master-slave synchronisation runs at low speed, and the workspace is padded with EVA foam. The Nova 2 arm itself carries five-level collision detection and references ISO/TS 15066 for collaborative operation.
The SDK covers the whole loop — data collection, model training and autonomous inference — with open APIs for master and slave joint angles, gripper control and camera RGB and depth streams, and exports in formats a custom network can consume. The slave gripper opens to 100 mm, an Intel RealSense D405 depth camera is specified, and the base includes a global camera bracket. The package includes two Nova 2 arms; because that materially changes the cost, we confirm the exact package contents, overall dimensions and system weight in writing before you order.
Key Capabilities
-
Records demonstrations on the real robot: An operator performs the task through the master hands and the platform captures joint angles, gripper state and RGB and depth imagery from the robot's own body.
-
Two six-axis Nova 2 arms: Each has 625 mm of reach for a 1,200 mm dual-arm working range, ±0.05 mm repeat positioning and up to 1.6 m/s of motion.
-
2 kg single-arm, 3 kg dual-arm payload: Capacity is rated per arm and separately for coordinated two-arm tasks.
-
Master hands under 400 g: 3D-printed monolithic joints and a spring-assisted chassis keep hand load below 400 g, with unlock and record buttons on the hand itself.
-
25 Hz end-to-end motion interface: The master-to-slave interface runs at 25 Hz from end to end.
-
Safety built around a human operator: Master and slave arms de-synchronise on power loss or alarm, the master hand is monitored for drops, synchronisation runs at low speed and the workspace is padded with EVA foam.
-
SDK from capture to inference: Open APIs cover master and slave joint angles, gripper control and camera RGB and depth streams, with exports for custom neural networks.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.