The CR20A is the palletizing size of Dobot's CRA series: 20 kg of payload with a 1,700 mm reach, enough to stack full cases across a standard pallet from a single pedestal. The arm weighs 73 kg and repeats to ±0.05 mm, with a maximum TCP speed of 2 m/s.
Beyond end-of-line stacking, the long reach lets one CR20A serve two machines, or a machine and a buffer, and handle heavy panels and bags across a wide cell. It draws 500 W from a single-phase 100 to 240 V AC supply at 47 to 63 Hz.
Two WAN ports carry TCP/IP, Modbus TCP, EtherNet/IP and PROFINET, an RS-485 port carries Modbus RTU and Wi-Fi is built in, so the arm takes signals from conveyors, scanners and the line PLC directly.
The arm is rated IP54 and works from 0 to 50 °C. For wet or oily cells the IP68 CR20AP is the sealed version of the same size, and for heavy polishing the CR20AF adds a flange force sensor. A 73 kg arm at 1,700 mm needs a rigid, well-anchored base.
Key Capabilities
-
20 kg over 1,700 mm: Enough payload and reach to stack full cases across a pallet from one pedestal.
-
Serves two stations: The long reach lets one arm work between two machines or a machine and a buffer.
-
±0.05 mm repeatability: Heavy loads are placed consistently at the edge of the envelope.
-
Line connectivity: TCP/IP, Modbus TCP, EtherNet/IP and PROFINET on two WAN ports, Modbus RTU over RS-485 and Wi-Fi.
-
Single-phase, 500 W: The controller takes 100 to 240 V AC at 47 to 63 Hz and the arm draws 500 W.
-
Sealed and force versions: The CR20AP (IP68) and CR20AF (force sensor) share this size when a cell needs them.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation, and on-site installation is not included in the product price.