The BrainCo Revo 3 U21 + SHF3L is a dexterous robotic hand package for the Unitree H2 EDU PLUS humanoid: BrainCo's 21-degree-of-freedom Revo 3 hand in its U21 build, without tactile sensors, together with an SHF3L sensing camera. It is the package for manipulation work driven by vision and joint control, where a wide camera view of the hand's workspace matters more than touch data.
The SHF3L weighs under 50 g and measures 25 × 25 × 33.54 mm. Its RRGB sensor with built-in ISP records 1920 × 1536 at 30 fps across a 196° horizontal field of view, outputs YUV422 8-bit through a rolling shutter, is rated from −40 to +85 °C and works with NVIDIA Jetson AGX Thor. Unitree fits the same camera at each wrist of its H2-D Ultimate K and L.
The hand itself is the full Revo 3 mechanism: five degrees of freedom in the thumb and four in each finger, all direct-driven and backdrivable, with 0.1° repeatability. It grips with 70 N, pinches with 20 N, carries 20 kg overall and opens and closes at 3 Hz, while position, MIT force-position, admittance and zero-torque control run at 500 Hz over EtherCAT, CAN FD or RS-485 on a 12–80 V supply.
The Revo 3 U21 with RGB for the H2 EDU is the same hand sold singly with an RGB camera. For contact data on the H2 EDU PLUS, choose the U21T tactile hand + SHF3L or the U21V visuo-tactile hand + SHF3L; the SharpaWave + SHF3L brings a 22-DoF tactile hand from Sharpa. The number of hands, the side and the camera mounting for your H2 are confirmed with the quotation. See every model in our dexterous robotic hands.
Key Capabilities
-
SHF3L camera in the package: An SHF3L sensing camera records 1920 × 1536 video at 30 fps across a 196° horizontal field of view.
-
Under 50 g, rated −40 to +85 °C: The camera measures 25 × 25 × 33.54 mm, outputs YUV422 8-bit from an RRGB sensor with built-in ISP and works with NVIDIA Jetson AGX Thor.
-
21 active degrees of freedom: Five thumb joints and four per finger run on direct-drive, backdrivable motors with 0.1° repeatability.
-
70 N five-finger grip: The fingertip pinch reaches 20 N, and the hand carries 20 kg overall or 5 kg on the four fingers.
-
No tactile layer: The U21 leaves out palm and fingertip touch sensing, which suits manipulation led by vision and joint control.
-
500 Hz over three buses: EtherCAT, CAN FD and RS-485 carry position, MIT force-position, admittance and zero-torque commands on a 12–80 V supply.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.