The Linkerbot Linker Hand O6 is a five-finger dexterous robotic hand that weighs 360 g, made in left- and right-hand versions. It has six active joints and five passive ones: motors drive thumb flexion, thumb abduction/adduction and the flexion of each finger, and the passive joints let the fingers wrap around irregular objects. Linkerbot designed it to bring a multi-finger hand to everyday robot projects.
The light aerospace-grade aluminium frame sits on high-torque servo modules with worm gears, and Linkerbot rates the hand at a 50 kg maximum load. The five fingers grip with up to 70 N, each fingertip pushes with 25 N and the thumb with 20 N, and positions repeat to ±0.20 mm under hybrid force-position control. It suits humanoid robots, cobot arms in logistics handling and assembly, and research groups that need a hand for grasping irregular objects without the weight of a high-DoF hand.
The O6 is made with CAN, CAN FD, RS-485 or EtherCAT and runs on 24–48 V. Linkerbot's host software for Windows and Ubuntu moves each joint from a slider, and its Python, ROS and ROS 2 SDKs drive one hand or a left and right pair, with optional fingertip pressure sensors. It comes in seven colours, from pearl white to obsidian black.
Within the Linker Hand range, the Linker Hand O7 adds a seventh active joint and a built-in 72-cell tactile array, and the Linker Hand L10 Standard moves ten joints, including side-to-side finger movement. For 16 active joints, see the Linker Hand L20 Pro, or compare all our dexterous robotic hands.
Key Capabilities
-
360 g, 50 kg maximum load: An aerospace-grade aluminium frame keeps the hand at 360 g, and Linkerbot rates its maximum load at 50 kg, so it adds little weight to a cobot wrist or a humanoid arm.
-
70 N five-finger grip: The five fingers close with up to 70 N together, each of the four fingertips pushes with 25 N and the thumb with 20 N.
-
6 active and 5 passive joints: Six motors drive thumb flexion, thumb abduction and the flexion of each finger, while five passive joints let the fingers curl around irregular shapes.
-
Worm-gear servo modules: The linkage fingers run on high-torque servo modules with worm gears under hybrid force-position control, repeating to ±0.20 mm.
-
Four bus options: The O6 is made with CAN, CAN FD, RS-485 or EtherCAT and runs on a 24–48 V supply.
-
Python, ROS and ROS 2: Linkerbot's SDKs drive a single O6 or a left and right pair, alongside host software for Windows and Ubuntu.
-
Optional fingertip sensing: Fingertip pressure sensors can be fitted, and their readings arrive through the same SDK for force-aware grasping.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.