The AgiBot OmniHand Pro 2025 is the high-end dexterous robotic hand of AgiBot's OmniHand 2025 range, built around force sensing in every fingertip. Its five fingers have 19 degrees of freedom, 12 of them driven by their own motors through a linkage and screw-rod transmission, inside a PA and silicone body that measures 207 × 98 × 56 mm and weighs no more than 750 g. AgiBot builds it as a left and a right hand, so state the side, or a pair, with your order.
What sets the Pro apart is what it feels. Each fingertip measures force in three axes and the palm in one, across more than 150 tactile points with 0.01 N resolution and a 0–50 N range, and the sensors withstand 1,000 N without damage. A tactile control mode joins speed, position, force and hybrid position-force control, so a grasp can be set by contact rather than by joint angle alone. That makes it a fit for manipulation and grasp-learning research, teleoperation, and humanoids or arms that handle fragile, small or mixed objects.
It is also strong for its size: up to 20 N at each fingertip, and holding a 5 cm rigid object it carries 35 kg palm up and 5 kg palm down. Fingers reposition to 0.02 mm, close on objects from 2 mm across and close fully in 0.8 s. Control and data run over CAN FD at 1 kHz on a 12–24 V supply, and AgiBot's SDK gives C++ and Python APIs, a kinematics library and a ROS 2 interface on Linux, with Windows host software for setup. The CAN FD and power cables come in the box.
Within the OmniHand family, the OmniHand 2025 Tactile right hand is the lighter interactive model, with 16 degrees of freedom (10 active), one-axis touch sensing that also covers the back of the hand, and RS-485 alongside CAN FD. The OmniHand 3 Ultra-M is AgiBot's direct-drive flagship with 21 active degrees of freedom and vision-based tactile fingertips. Compare them with the rest of our dexterous robotic hands.
Key Capabilities
-
3-axis force in every fingertip: Each fingertip senses force in three axes and the palm in one, with more than 150 tactile points read at 0.01 N resolution across a 0–50 N range.
-
19 degrees of freedom, 12 driven: Twelve motors move 19 joints through a linkage and screw-rod drive, so the four fingers spread ±10° and the thumb rotates 50° as well as flexing.
-
20 N at the fingertip: Fingertips push with up to 20 N, and holding a 5 cm rigid object the hand carries 35 kg palm up and 5 kg palm down.
-
0.02 mm repositioning: Fingers return to position within 0.02 mm and close on objects as small as 2 mm, which suits precise pinches and small parts.
-
Five control modes: Speed, position, force, hybrid position-force and tactile modes run over CAN FD at 1 kHz, with joint position, speed, torque, temperature, current and tactile pressure fed back.
-
C++, Python and ROS 2: AgiBot's SDK offers C++ and Python APIs with a kinematics library and a ROS 2 interface on Linux, and it runs on Windows as well.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.