Prezzo medio giornaliero
Importi in USD
J Tech - Shapeoko3 Magnet Mounting Kit
J Tech · Shapeoko3 Magnet Mounting Kit
£38,83
Descrizione
Laser Upgrade Your Shapeoko3! Installation Instructions: CLICK HERE Purchase this if you bought the magnetic laser shroud version. 1 - Laser Holder: Holds the laser and attaches to the Mount. 2 - Dust Boot Mount: Fits over the aluminum spindle holder in the front. 3 - M3 12mm Screws/Nuts: To attach the laser holder to the main mount. 4 - Zip Ties: To clean everything up for cabling. 5 - Zip Tie Holder: To place on the Z axis gantry to hold the laser cable in place. 6 - Molex Mini-Fit Cable: Input control cable for the laser driver to the Carbide Board. 7 - Press Fit Pin and Tool: For putting the press-fit connector on the Carbide Board. 8 - Laser and Fan Extension Cables: 10 ft extension cables for the laser and fan Full Mounting Kit New and Improved! More Rigid Design! Works On ALL 3, 3XL, and 3XXL Models. This is the mounting kit for the Shapeoko 3 CNC system as seen in the instructions page. This kit includes everything needed to upgrade your Shapeoko3 XL and XXL system.
Laser Upgrade Your Shapeoko3! Installation Instructions: CLICK HERE Purchase this if you bought the magnetic laser shroud version. 1 - Laser Holder: Holds the laser and attaches to the Mount. 2 - Dust Boot Mount: Fits over the aluminum spindle holder in the front. 3 - M3 12mm Screws/Nuts: To attach the laser holder to the main mount. 4 - Zip Ties: To clean everything up for cabling. 5 - Zip Tie Holder: To place on the Z axis gantry to hold the laser cable in place. 6 - Molex Mini-Fit Cable: Input control cable for the laser driver to the Carbide Board. 7 - Press Fit Pin and Tool: For putting the press-fit connector on the Carbide Board. 8 - Laser and Fan Extension Cables: 10 ft extension cables for the laser and fan Full Mounting Kit
Storico dei prezzi
Andamento del prezzo medio
Un dato al giorno, calcolato in base alla data di rilevazione.
$51,32
Le medie sono calcolate per giorno UTC sulla base di tutti i prezzi delle offerte registrati.
Inserzioni correlate
JTech - X Carve Compatible Front Magnet Mounting Kit
J Tech
£34
JTech - X Carve Inventables Dust Boot Magnet Side Mounting Kit
J Tech
£34
Go2 Robot Dog Protective Head Shield
Futurology Tech
$39,99
1.1V 1,000 mAh Battery for TurtleBot3 and Robotis OP - LB-011
Unitree
35,12 €
Dynamixel XL430-W250-T Servo
Robotis
36 €
Dynamixel XL330-M288-T servo motor
Robotis
40,20 €
Dynamixel XL330-M077-T servo motor
Robotis
40,20 €
Fakra GMSL2 M-F Extension Cable for ZED X Camera
Unitree
39 €
DFRobot - Romeo V2-All in one Controller
DFRobot
£39,92
RoboSavvy - USB to RS-485 3Mbps (Dynamixel compatible)
Robotis
£35
Robotis - Dynamixel AX-12A
Robotis
£38,56
Robotis - Dynamixel AX-12W
Robotis
£38,55