The Ultimate edition is the highest of the three Dex1-1 configurations. The gripper underneath is the same two-finger parallel jaw as the rest of the range: 90 mm of stroke, an 80 mm jaw, gripping force adjustable from 5 N to 120 N, speed from 50 mm/s to 375 mm/s and 0.1 mm fingertip position resolution.
Unitree builds the Dex1-1 in two versions, a standard one and a camera-equipped one with a 1080p RGB camera at 30 or 60 frames per second and a 118° by 87° field of view. The exact camera, depth-sensing and bracket complement of the Ultimate package is confirmed in writing before the order.
For a buyer the practical reading is this: all three editions grip identically, and what you are choosing is how much perception hardware arrives bolted to the jaw. The Standard edition arrives without a camera, the Advanced edition with the RGB camera, and the Ultimate edition is the fullest package of the three.
The electrical and control picture is unchanged across the range: 24–64 V operation with 24 or 48 VDC recommended, a -20 °C to 60 °C operating range, high-speed RS-485 at 6 Mbps, a 1000 Hz control frequency, a 5 N·m peak-torque motor through a 1:25 reduction and a 15-bit absolute encoder.
Key Capabilities
-
The fullest Dex1-1 package: Ultimate is the top of the three configurations, with more perception hardware on the jaw than the Standard or Advanced editions.
-
Same gripping mechanism as the rest of the range: Every Dex1-1 shares one mechanical specification: a 90 mm stroke on an 80 mm jaw with 5 N to 120 N of adjustable force.
-
Sensor complement confirmed in writing: We establish the exact camera and depth-sensing fit of the Ultimate package in writing before you order.
-
20 kg form-fitting load: A form-fitting horizontal grasp is rated to 20 kg and a vertical friction grasp to 5 kg on a square steel block.
-
1000 Hz control, 15-bit absolute encoder: High-speed RS-485 at 6 Mbps carries angle, velocity, torque and temperature feedback with 0.1 mm fingertip position resolution.
-
Wide supply and temperature range: The gripper runs on 24 to 64 V across a -20 °C to 60 °C operating range, with 24 or 48 VDC recommended.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.