SharpaWave is Sharpa's five-finger tactile dexterous robotic hand, offered here for the Unitree H2 EDU PLUS humanoid together with an SHF3L sensing camera. It is a different hand from the BrainCo Revo 3 packages for this robot: 22 active degrees of freedom from 22 actuation modules, a human-scale isomorphic design, and touch sensing concentrated in the fingertips.
Each fingertip carries Sharpa's Dynamic Tactile Array, with 240 × 240 tactile resolution at 1 mm spacing, 0.02 N force resolution over 0 to 30 N and six-axis force and torque sensing, refreshed at 180 fps with 20 ms latency. It detects pressure, slip, force changes and contact location, and it can output the raw tactile image, which gives embodied-AI teams fingertip data fine enough for very light objects and for training tactile policies.
Mechanically the hand weighs 1.3 kg and measures 208 × 90 × 50 mm. It grips with 150 N and pushes with 20 N at the fingertip, carries 40 kg, moves at 4 Hz, swings its four fingers ±20° and repeats fingertip position to ±1 mm, down to a 10 mm grasp diameter; Sharpa rates it for more than a million cycles. It connects over 1000BASE-T Ethernet at 500 Hz on 18–28 V, with Sharpa Pilot, the Sharpa Wave SDK in C++ and Python, ROS 2, MuJoCo and NVIDIA Isaac Sim. The SHF3L camera adds 1920 × 1536 video at 30 fps across a 196° horizontal view.
On the same robot, the BrainCo Revo 3 U21V + SHF3L combines palm touch with fingertip vision, the Revo 3 U21T + SHF3L senses across the palm, and the Wuji Hand 2 runs 1,000 Hz force-position control without touch. The number of hands, the side and the camera mounting for your H2 are confirmed with the quotation. Compare all our dexterous robotic hands.
Key Capabilities
-
22 active degrees of freedom: Twenty-two actuation modules drive a human-scale, five-finger hand, one more active joint than the 21-DoF Revo 3.
-
240 × 240 tactile resolution per fingertip: Sharpa's Dynamic Tactile Array reads pressure, slip, force change and contact location at 1 mm spacing and 180 fps.
-
0.02 N force resolution: Each fingertip measures six-axis force and torque over 0 to 30 N, with 20 ms latency.
-
150 N grip, 40 kg payload: Fingertips push with 20 N, and the 1.3 kg hand moves at 4 Hz with ±1 mm fingertip repeatability.
-
Gigabit Ethernet at 500 Hz: The hand connects over 1000BASE-T Ethernet and runs on an 18–28 V supply.
-
ROS 2, MuJoCo and Isaac Sim: Sharpa Pilot, the Sharpa Wave SDK in C++ and Python, and simulation support cover development from model to hardware.
-
SHF3L camera included: The camera records 1920 × 1536 at 30 fps across a 196° horizontal field of view.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.