Prix moyen quotidien
Montants en USD
Description
This is the serial backpack for graphic LCDs. The SparkFun Graphic LCD Serial Backpack interfaces to either our 160x128 pixel “Huge” Graphic LCD, or the smaller 128x64 pixel display, and provides a simple serial interface to a full range of controls. This backpack will allow you to write text, draw lines, circles and boxes, set or reset individual pixels, and erase specific blocks of the display. The backlight and baud rate can also be controlled via serial communication. There's also a reverse mode that allows the screen to operate blue on white instead of white on blue. Additionally, all source code for the ATMega168 processor is compiled using the free WinAVR compiler and is free for downloading. There is a solder jumper on the backpack that determines which display is used. When the solder jumper is closed, code for the 128x64 display will run. If the jumper is open, code for the 160x128 display will run. Check out this tutorial! Features: Supply voltage: 6V–7V DC Current draw: 220mA (backlight at 100%) Serial input: 0-5V Adjustable baud rate (115200 default) with 8 data bits, no parity, 1 stop bit Draw text, circles, lines boxes Turn on or off individual pixels Potentiometer controlled contrast adjustment Backlight control 2.02x1.11" (51x28mm) Documents: Schematic Eagle Files Hookup Guide GitHub (Design Files & Example Code) GitHub (Library)
This is the serial backpack for graphic LCDs. The SparkFun Graphic LCD Serial Backpack interfaces to either our 160x128 pixel “Huge” Graphic LCD, or the smaller 128x64 pixel display, and provides a simple serial interface to a full range of controls. This backpack will allow you to write text, draw lines, circles and boxes, set or reset individual pixels, and erase specific blocks of the display. The backlight and baud rate can also be controlled via serial communication. There's also a reverse mode that allows the screen to operate blue on white instead of white on blue. Additionally, all source code for the ATMega168 processor is compiled using the free WinAVR compiler and is free for downloading. There is a solder jumper on the backpack that determines which display is used. When the solder jumper is closed, code for the 128x64 display will run. If the jumper is open, code for the 160x128 display will run. Check out this tutorial! Features: Supply voltage: 6V–7V DC Current draw: 220mA (backlight at 100%) Serial input: 0-5V Adjustable baud rate (115200 default) with 8 data bits, no parity, 1 stop bit Draw text, circles, lines boxes Turn on or off individual pixels Potentiometer controlled contrast adjustment Backlight control 2.02x1.11" (51x28mm) Documents: Schematic Eagle Files Hookup Guide GitHub (Design Files & Example Code) GitHub (Library)
Historique des prix
Historique des prix moyens
Un point de données par jour, calculé selon la date d’observation.
$23,13
Les moyennes sont calculées par jour UTC à partir de tous les prix d’offre enregistrés.
Annonces similaires
Circular Robotics Chassis Kit (Three-Layer)
RoboSavvy
£19,17
Extruded Aluminum Enclosure Kit for HackRF One
RoboSavvy
£17
Micro Gearmotor - 175 RPM (6-12V)
RoboSavvy
£17,61
Micro Gearmotor - 460 RPM (6-12V)
RoboSavvy
£17,61
Micro Gearmotor - 90 RPM (6-12V)
RoboSavvy
£17,61
Robot Cable-3P-XL 110mm 5pcs
RoboSavvy
£16,08
Robot Cable-X4P 240mm 10pcs for DYNAMIXEL X-series
RoboSavvy
£17,83
SparkFun Basic 16x2 Character LCD - White on Black, 5V (with Headers)
RoboSavvy
£17,20
SparkFun Servo Trigger
RoboSavvy
£16,45
Vacuum Pump - 12V
RoboSavvy
£19,11
2S/3S LIPO Battery Charger LBC-10
RoboSavvy
£12,25
Arducam Upgraded Camera Pan Tilt Platform
RoboSavvy
£22,48