Precio medio diario
Importes en USD
Descripción
DFRobot - Arduino Ethernet Shield (Support Mega and SD Card) The DFRduino Ethernet Shield V2 is finally released. This new version supports Mega both 1280 and 2560. And it supports SD card read/write as well. The ethernet shield is fully functional now. The V2 Ethernet Shield is fully compatible with Ardunio Ethernet Shield. With the offical ethernet library, you can do exactly the same thing as the original one. But at a more affordable price. The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top. Arduino uses digital pins 10, 11, 12, and 13 (SPI) to communicate with the W5100 on the ethernet shield. These pins cannot be used for general i/o. The shield provides a standard RJ45 ethernet jack. The reset button on the shield resets both the W5100 and the Arduino board. The shield contains a number of informational LEDs: PWR: indicates that the board and shield are powered LINK: indicates the presence of a network link and flashes when the shield transmits or receives data FULLD: indicates that the network connection is full duplex 100M: indicates the presence of a 100 Mb/s network connection (as opposed to 10 Mb/s) RX: flashes when the shield receives data TX: flashes when the shield sends data COLL: flashes when network collisions are detected Compatibility: Arduino Mega 1280/2560 Arduino UNO Arduino Dumlinove Documents: Ethernet Library Reference Schematics
DFRobot - Arduino Ethernet Shield (Support Mega and SD Card) The DFRduino Ethernet Shield V2 is finally released. This new version supports Mega both 1280 and 2560. And it supports SD card read/write as well. The ethernet shield is fully functional now. The V2 Ethernet Shield is fully compatible with Ardunio Ethernet Shield. With the offical ethernet library, you can do exactly the same thing as the original one. But at a more affordable price. The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip. The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top. Arduino uses digital pins 10, 11, 12, and 13 (SPI) to communicate with the W5100 on the ethernet shield. These pins cannot be used for general i/o. The shield provides a standard RJ45 ethernet jack. The reset button on the shield resets both the W5100 and the Arduino board. The shield contains a number of informational LEDs: PWR: indicates that the board and shield are powered LINK: indicates the presence of a network link and flashes when the shield transmits or receives data FULLD: indicates that the network connection is full duplex 100M: indicates the presence of a 100 Mb/s network connection (as opposed to 10 Mb/s) RX: flashes when the shield receives data TX: flashes when the shield sends data COLL: flashes when network collisions are detected Compatibility: Arduino Mega 1280/2560 Arduino UNO Arduino Dumlinove Documents: Ethernet Library Reference Schematics
Historial de precios
Historial del precio medio
Un punto de datos por día, calculado según la fecha de observación.
$15,96
Los promedios se calculan por día UTC a partir de todos los precios de oferta registrados.
Anuncios relacionados
DFRobot - Servo Controller DFR0136 ATmega328P (Arduino Compatible)
DFRobot
£11
DFRobot - Gravity: 4 Channel Relay Shield for Arduino
DFRobot
£14,50
DFROBOT - Bluetooth 5.0 Audio Receiver Board-Controllable Volume
DFRobot
£2,97
DFRobot - MiniQ Discovery Kit
DFRobot
£79,33
DFRobot - Romeo V2-All in one Controller
DFRobot
£39,92
DFRobot - Wireless GamePad V2.0 for Arduino
DFRobot
£51
LBB-040 Battery Charger for LB-040 Battery (DARwin-Mini)
Unitree
11,54 €
Set-ISW-01 Wheel Set for TurtleBot3
Robotis
11,54 €
Unitree Go1 / Go2 / G1 XT30 Kabel
Unitree
10,95 €
2S/3S LIPO Battery Charger LBC-10
RoboSavvy
£12,25
BIOLOID Skin FP04-F56/F57/F58/F59 Set
RoboSavvy
£11,08
Cable Carrier - 10x15mm (0.5m Length)
RoboSavvy
£12,37