The KEENON KLEENBOT C40 is KEENON's professional 4-in-1 cleaning robot. It sweeps, vacuums, scrubs and pushes dust on short-pile carpet and on marble, wood, tiles, vinyl, epoxy, granite and artificial stone, detects carpet and hard floor automatically, and handles hair, paper scraps, dust, coffee, juice and other common debris and stains.

Its triple roller brush keeps dry and wet waste apart: two rollers pre-sweep into the dust box, one roller scrubs, and adjustable suction of up to 23,500 Pa leaves the floor dry about 30 seconds after scrubbing. It sweeps 560 mm wide with dual side brushes, vacuums and scrubs 400 mm wide and cleans up to 1,100 m² an hour, with a 16 L clean water tank, an 11 L removable, washable dirty water tank and an 8 L dust bag. Ten detection components, including LiDAR, dual stereo vision, four line lasers and three ultrasonic modules, handle crowds and irregular obstacles.

A 5-second battery swap keeps it working: up to 5 hours of scrubbing or 12 hours of sweeping per charge, and 2 hours to charge. It charges itself when a task ends, takes in fresh water, drains waste water and doses detergent at the ratio set in the app. VSLAM path planning, breakpoint resume, IoT elevator and door passing, multi-machine scheduling, an 11.6-inch touchscreen and app or web management complete it. It measures 578 × 500 × 690 mm (616 × 550 × 690 mm with squeegee), weighs 70 kg and needs a passage of at least 650 mm.

Robotix Market supplies the KLEENBOT C40 new through established distribution channels, with the full KEENON manufacturer warranty and worldwide shipping. The brochure on this page compares the C20, C30, C40 and C55 side by side.