The M1 Pro is Dobot's four-axis collaborative SCARA arm for the desktop. It carries a rated load of 1.5 kg within a 400 mm reach and repeats to ±0.02 mm, which suits fast, precise top-down work at a workbench: pick and place, small-part assembly and test handling.
The base measures 230 × 175 mm and the robot weighs 15.7 kg. It plugs into ordinary 100 to 240 V AC mains at 50 or 60 Hz, runs internally at 48 V DC and is rated at 192 W. TCP/IP and Modbus TCP connect it to a PLC or a PC, and it is programmed in DobotStudio Pro.
Where a six-axis cobot such as the CR5A can approach a part from any angle, a SCARA works in horizontal planes with a vertical axis, which suits tasks where parts arrive and leave on the same level. Choose the M1 Pro when the work is top-down and the load stays within 1.5 kg.
It works in ambient temperatures from 0 to 40 °C and is designed for desktop installation. Grippers, suction tools and fixtures are specified with the quotation.
Key Capabilities
-
Four-axis SCARA: Horizontal arm joints plus a vertical axis cover top-down pick and place on a bench.
-
1.5 kg over 400 mm: Rated load and reach suit small parts, electronics and light assemblies.
-
±0.02 mm repeatability: Placement repeats to two hundredths of a millimetre.
-
Desktop footprint: A 230 × 175 mm base and 15.7 kg weight fit on a workbench.
-
Ordinary mains supply: It runs from 100 to 240 V AC at 50 or 60 Hz and is rated at 192 W.
-
DobotStudio Pro: TCP/IP and Modbus TCP connect it to a line, and it is programmed in Dobot's own software.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation, and on-site installation is not included in the product price.