The CR5A is the base 5 kg arm of Dobot's CRA series and the general-purpose size of the range: 5 kg of payload over a 900 mm working radius, ±0.02 mm repeatability and a 25 kg arm. It covers the everyday cobot jobs, machine tending, pick and place, screwdriving, assembly and test handling, where the gripper and part stay under 5 kg.
It is also the arm the CR5 variants are built on. The CR5AS adds SafeSkin pre-collision sensing, the CR5AF a force sensor in the flange and the CR5AP IP68 sealing. The CR5A is the right choice for clean, dry cells where none of those is needed.
Two WAN ports carry TCP/IP, Modbus TCP, EtherNet/IP and PROFINET, an RS-485 port carries Modbus RTU and Wi-Fi is built in, so it joins a PLC-controlled line without a protocol gateway. The controller runs on 100 to 240 V AC at 47 to 63 Hz and the arm draws 150 W.
Maximum TCP speed is 2 m/s. The arm is rated IP54, works from 0 to 50 °C and is built from aluminium alloy and ABS. Joint ranges, end effector and mounting hardware are confirmed with the order.
Key Capabilities
-
5 kg over 900 mm: The general-purpose size of the CRA range, for grippers and parts up to 5 kg.
-
±0.02 mm repeatability: Placement repeats to two hundredths of a millimetre for assembly and test handling.
-
Base of the CR5 family: SafeSkin, force sensing and IP68 versions build on this arm when a cell needs them.
-
Four industrial protocols: TCP/IP, Modbus TCP, EtherNet/IP and PROFINET on two WAN ports, with Modbus RTU over RS-485 and Wi-Fi.
-
Single-phase mains, 150 W: The controller takes 100 to 240 V AC and the arm draws 150 W.
-
IP54 and 0 to 50 °C: The arm is rated for dust and splash exposure and ambient temperatures up to 50 °C.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation, and on-site installation is not included in the product price.