The BrainCo Revo 3-21 V-Touch is the visuotactile build of BrainCo's Revo 3 dexterous robotic hand, model U21VT, made as a left or a right hand. It is the most heavily sensed Revo 3: a piezoresistive pressure array of 336 points in the palm and visuotactile imaging in the fingertips, on the same 21 fully active, direct-drive and backdrivable joints as the rest of the range.
The two layers answer different questions. The palm array maps where and how hard an object presses, from 0 to 20 N at 0.01 N resolution; the fingertip sensors image the contact surface through 2,000 markers, which BrainCo uses to capture fine texture and slip. BrainCo calls this pairing of full-palm arrays and fingertip visuotactile sensing an industry first. It suits research on in-hand manipulation, slip detection, material recognition and learning from touch, where fingertip images become training data.
Mechanically and electrically it matches the other Revo 3 versions: five joints in the thumb and four per finger, at least 100 N grip and 25 N pinch, a 20 kg payload, 0.33 s open to close, 0.1° repeatability, 33 grasp patterns on objects of 10–150 mm, and 500 Hz control over EtherCAT, CAN FD or RS-485 on 16–85 V. BrainCo supports it with Python and C/C++ SDKs, a ROS 2 Humble driver, URDF, MuJoCo and Isaac Sim models and open reinforcement-learning, VLA and teleoperation demos.
If palm pressure alone is enough, the Revo 3-21 Touch (U21T) carries a 451-point array, and the Revo 3-21 Basic (U21) has no tactile sensors. For a Unitree H2 there is a Revo 3 visuo-tactile hand configured for the H2, and our other dexterous robotic hands cover the Revo 2 and other makers.
Key Capabilities
-
Visuotactile fingertips: Visuotactile imaging in the fingertips, with 2,000 markers, captures fine surface texture and slip.
-
336-point palm array: A piezoresistive array maps pressure across the palm from 0 to 20 N at 0.01 N resolution, sampled at 100 Hz.
-
21 direct-drive degrees of freedom: Five thumb joints and four per finger, each with its own backdrivable motor, give compliant contact and full opposition.
-
33 grasp patterns, 10–150 mm: BrainCo reports a full Kapandji score and all 33 grasps of the Feix GRASP taxonomy, from 10 mm to 150 mm objects.
-
100 N grip, 20 kg payload: The hand grips with at least 100 N, pinches with 25 N and carries 20 kg, or 5 kg on four fingers.
-
500 Hz on three buses: Joint control runs at 500 Hz over EtherCAT, CAN FD or RS-485 on a 16–85 V supply.
-
Sim-to-real software: Python and C/C++ SDKs, a ROS 2 Humble driver and URDF, MuJoCo and Isaac Sim models come with reinforcement-learning, VLA and teleoperation demos.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.