The BrainCo Revo 3-21 Basic is BrainCo's 21-degree-of-freedom dexterous robotic hand in its base build, Revo 3 U21, without tactile sensors, made as a left or a right hand. Each of its 21 joints has its own direct-drive, backdrivable motor: five in the thumb and four in each finger, so every finger flexes at three joints and spreads sideways at the knuckle.
That joint count is what separates the Revo 3 from the 11-degree-of-freedom Revo 2. BrainCo reports a full Kapandji opposition score and all 33 grasps of the Feix GRASP taxonomy, on objects from 10 mm to 150 mm across, which opens up in-hand manipulation: turning, re-gripping and using tools rather than only closing on them. The hand grips with at least 100 N, pinches with at least 25 N, carries 20 kg (5 kg on four fingers), moves a joint from open to close in 0.33 s and repeats to 0.1°.
It is aimed at embodied-AI and humanoid research teams, universities and robot makers training manipulation policies. Control runs at 500 Hz over EtherCAT, CAN FD or RS-485 in position, MIT force-position, current, admittance or impedance mode, from a 16–85 V supply, and an IMU and a temperature sensor sit on the mainboard. BrainCo provides Python and C/C++ SDKs, a ROS 2 Humble driver, URDF, MuJoCo and Isaac Sim models, and reinforcement-learning, VLA and teleoperation demos. Core joints are rated for 1,000,000 flex cycles.
All Revo 3 versions share these specifications and differ only in sensing. The Revo 3-21 Touch (U21T) adds a 451-point pressure array, and the Revo 3-21 V-Touch (U21VT) combines a 336-point palm array with visuotactile fingertips. For a Unitree H2, see the Revo 3 U21 hand for the H2 EDU. Choose the Basic when motor position and current feedback are enough, or compare the Revo 2 range and other makers among our dexterous robotic hands.
Key Capabilities
-
21 active degrees of freedom: Every joint has its own motor: five in the thumb and four in each finger, including sideways spread at each knuckle.
-
Direct-drive, backdrivable joints: With no gearbox between motor and joint, the fingers yield to outside force, and BrainCo designs them for millisecond response and compliant, safe contact.
-
100 N grip, 20 kg payload: The hand grips with at least 100 N, pinches with at least 25 N and holds 20 kg in the whole hand or 5 kg on four fingers.
-
33 grasp patterns: BrainCo reports a full Kapandji opposition score and all 33 grasps of the Feix GRASP taxonomy, on objects 10 to 150 mm across.
-
0.33 s open to close: Joints travel open to close in 0.33 s and repeat to 0.1° under position, MIT force-position, current, admittance or impedance control at 500 Hz.
-
EtherCAT, CAN FD and RS-485 on 16–85 V: Three industrial buses and a wide supply input let the hand run from a humanoid's main power rail.
-
Open software stack: Python and C/C++ SDKs, a ROS 2 Humble driver and URDF, MuJoCo and Isaac Sim models come with reinforcement-learning and teleoperation demos.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.