new RoboSavvy robot — 图片 1

SparkFun Ardumoto Shield Kit

RoboSavvy

£27.35

成色

New

Robots are fun, and Arduinos are easy. So wouldn't it be nice if there were a kit that included everything you need to get your Arduino device set up to control a simple two-motor-circuit buddy? The SparkFun Ardumoto Shield Kit is perfect for any robot enthusiast and includes an Ardumoto Shield, as well as pairs of tires, motors, connectors and wires. And, of course, it’s all stuffed in a classic SparkFun red box (which may come in handy as a robot chassis). The Ardumoto Shield is an easy-to-use dual-motor controller for Arduino. Combined with an Arduino, the Ardumoto makes a fantastic controller platform for RC vehicles or even small autonomous robots. At the heart of the Ardumoto --- the big, black chip right in the middle --- is an L298, one of our favorite dual-channel motor drivers around, capable of driving up to 2A per channel. The board takes its power from the same Vin line as the Arduino board and includes blue and yellow LEDs to indicate active direction. All driver lines are diode protected from back EMF. Note: The motors included with this kit are not compatible with the Wheel Encoder kit. Sorry for the inconvenience. Get Started with the SparkFun Ardumoto Kit Guide Kit Includes: 1x SparkFun Ardumoto Shield 2x Hobby Gearmotor -- 65 RPM 2x Wheel -- 65mm (Rubber Tire) 1x Arduino Stackable Header Kit 3x Screw Terminals 3.5mm Pitch (2-Pin) 1x 9V to Barrel Jack Adapter 2x Black Wire -- 5" Length (22AWG Solid Core) 2x Red Wire -- 5" Length (22AWG Solid Core) Documents: Schematic Eagle Files Hookup Guide Datasheet (L298) GitHub

Robots are fun, and Arduinos are easy. So wouldn't it be nice if there were a kit that included everything you need to get your Arduino device set up to control a simple two-motor-circuit buddy? The SparkFun Ardumoto Shield Kit is perfect for any robot enthusiast and includes an Ardumoto Shield, as well as pairs of tires, motors, connectors and wires. And, of course, it’s all stuffed in a classic SparkFun red box (which may come in handy as a robot chassis). The Ardumoto Shield is an easy-to-use dual-motor controller for Arduino. Combined with an Arduino, the Ardumoto makes a fantastic controller platform for RC vehicles or even small autonomous robots. At the heart of the Ardumoto --- the big, black chip right in the middle --- is an L298, one of our favorite dual-channel motor drivers around, capable of driving up to 2A per channel. The board takes its power from the same Vin line as the Arduino board and includes blue and yellow LEDs to indicate active direction. All driver lines are diode protected from back EMF. Note: The motors included with this kit are not compatible with the Wheel Encoder kit. Sorry for the inconvenience. Get Started with the SparkFun Ardumoto Kit Guide Kit Includes: 1x SparkFun Ardumoto Shield 2x Hobby Gearmotor -- 65 RPM 2x Wheel -- 65mm (Rubber Tire) 1x Arduino Stackable Header Kit 3x Screw Terminals 3.5mm Pitch (2-Pin) 1x 9V to Barrel Jack Adapter 2x Black Wire -- 5" Length (22AWG Solid Core) 2x Red Wire -- 5" Length (22AWG Solid Core) Documents: Schematic Eagle Files Hookup Guide Datasheet (L298) GitHub

价格历史

平均价格走势

每天显示一个数据点,按观测日期计算平均值。

每日平均价格

金额单位:USD

$35.80
以 USD 计价的平均价格历史图表从 2026年10月12日 到 2026年10月12日 的 1 条观测数据折线图。$35.83$35.82$35.81$35.80$35.7910月12日2026年10月12日:平均价 $35.80

每天的平均价格根据该 UTC 日期记录的所有报价计算。