The BrainCo Revo 3 U21 with RGB is a five-finger dexterous robotic hand for the Unitree H2 EDU humanoid, sold as one hand for the left or the right side. U21 is the Revo 3 build without tactile sensors, and the RGB edition adds an RGB camera to the hand. All 21 of its degrees of freedom are direct-driven and backdrivable, a design BrainCo chose for in-hand manipulation rather than a simple open-and-close grasp.
Buying one side at a time suits H2 EDU teams that want to start development on a single dexterous hand, or that work on teleoperation, imitation learning, grasp planning and hand-arm control where camera and joint data lead and touch data is not needed. BrainCo reports that the Revo 3 covers 33 grasp types and reaches a full Kapandji thumb-opposition score, and the hand takes objects from 10 mm to 150 mm across.
Five fingers grip with 70 N and a fingertip pinch reaches 20 N. The hand carries 20 kg overall or 5 kg on the four fingers, opens and closes at 3 Hz and repeats joint positions to 0.1°. Position, MIT force-position, admittance and zero-torque control run at 500 Hz over EtherCAT, CAN FD or RS-485 from a 12–80 V supply, and the hand measures 215 × 105 × 50 mm. BrainCo provides Python and C++ SDKs, and the Revo 3 works with NVIDIA Omniverse, MuJoCo, ManiSkill and ROS.
For an H2 EDU PLUS, the same non-tactile hand comes with an SHF3L sensing camera in the Revo 3 U21 + SHF3L package. When touch matters, the Revo 3 U21T tactile hand adds a full-palm array and the Revo 3 U21V visuo-tactile hand adds fingertip vision on top of it. The Wuji Hand 2 with RGB is the other single, non-tactile hand for the H2. Compare them with the rest of our dexterous robotic hands.
Key Capabilities
-
One hand, your choice of side: Each unit is a single Revo 3 U21 for the left or the right arm of an H2 EDU, so a two-handed robot takes one of each.
-
21 direct-drive joints: The thumb has five degrees of freedom and every other finger four, all on backdrivable direct-drive joints that repeat to 0.1°.
-
70 N grip, 20 N pinch: Five fingers close with 70 N, a fingertip pinch reaches 20 N, and the hand carries 20 kg overall or 5 kg on the four fingers.
-
3 Hz open and close: The hand opens and closes three times a second and takes objects from 10 mm to 150 mm across, in 33 grasp types.
-
Four control modes at 500 Hz: Position, MIT force-position, admittance and zero-torque control run over EtherCAT, CAN FD or RS-485.
-
No tactile sensors: The U21 senses through an IMU and a temperature sensor on its mainboard, which makes it the simplest Revo 3 build.
-
12–80 V input: The hand accepts any supply from 12 V to 80 V and draws at most 10 A at 24 V.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.