This is one Elephant Robotics myGripper H100 in its right-hand version, part number 4010700100: a three-finger dexterous robotic hand for the myCobot Pro 630 and the Mercury series. It equips a single Pro 630 working on its own, or the right arm of a two-armed Mercury whose left side is already fitted.
Six digital servo motors move the hand's three fingers through six joints. Each servo supports current, position and speed control, so a program sets output torque, motion speed and absolute finger position for every joint on a 0–100 scale. The hand holds 500 g at rated load across a 0–130 mm gripping range, moves its joints at 60° per second and reports its grasp status at 100 Hz: moving, stopped, object clamped or object dropped.
On board, a 240 MHz dual-core ESP32 with Wi-Fi and dual-mode Bluetooth runs the hand. A single M8 8-pin cable carries 24 V at 2 A, RS-485 and two IO inputs and two IO outputs, and a USB-to-485 module in the box connects it to a computer. The serial protocol is open, Elephant Robotics' Python library covers angles, speed, torque, gestures and PID tuning, and ROS with RViz simulation is supported. The hand weighs 780 g, screws onto the arm and is rated for 100,000 cycles or more.
For the other side, order the myGripper H100 left hand, or take both sides at once as the myGripper H100 Left + Right pair. More makers and designs are in our dexterous robotic hands.
Key Capabilities
-
One right hand: Part number 4010700100 is a single right hand, for a right-side arm or to complete a two-handed setup.
-
Torque, speed and position per joint: Six digital servos each support current, position and speed control, set on a 0–100 scale from Python.
-
100 Hz grasp feedback: The hand reports moving, stopped, clamped or dropped in real time over RS-485, for grasp monitoring and data collection.
-
ESP32 controller on board: A 240 MHz dual-core ESP32 with Wi-Fi and dual-mode Bluetooth runs the hand.
-
One M8 cable with IO: A single M8 8-pin cable carries 24 V power, RS-485 and two IO inputs and two IO outputs.
-
500 g across 0–130 mm: The hand holds 500 g at rated load across a 0–130 mm gripping range and weighs 780 g.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.