Średnia cena dzienna
Kwoty w USD








Key Features
Active DOF
Net Weight
Battery Capacity
Battery Life
Maximum Payload
Walking Speed
Max Joint Torque
Onboard Compute
Warranty
Key Features
Active DOF
Net Weight
Battery Capacity
Battery Life
Maximum Payload
Walking Speed
Max Joint Torque
Onboard Compute
Warranty
The AGIBOT X2 Neo is a 131 cm, ~37 kg half-scale bipedal humanoid built for performance and presence — events, stage, retail activations, visitor centres and classrooms. Thirty active degrees of freedom, more than twenty built-in motions and an expression display, in a package two people can lift and a van can carry.
The AGIBOT X2 Neo is a 131 cm bipedal humanoid built for performance and presence. It walks, dances, gestures, talks and holds an expression — and at roughly 37 kg and half human scale, two people can lift it into a van and have it on its feet in a few minutes. For events, stage work, retail activations, visitor centres and classrooms, it is the most practical walking humanoid AGIBOT makes.
Thirty active degrees of freedom drive it: one in the head, seven per arm, three at the waist and six per leg, with a maximum joint torque of 120 N·m. It runs at up to 1.8 m/s in running mode, carries 3 kg at the end effector, clears a 50 mm step and turns inside a 900 mm circle. More than twenty motions are built in and ready to trigger from the remote, the AGIBOT Go app or a voice command.
A roughly 500 Wh battery gives about two hours of operation and recharges from 15% to full in about an hour and a half at a typical draw of 240 W. An expression display, speaker, microphone, LED ring and head touch sensor handle the interaction side; 4G/5G, Wi-Fi 6 and Bluetooth handle connectivity.
Half Scale Is the Practical Scale. At 131 cm and ~37 kg, the X2 Neo fits a passenger lift, a standard road case and a two-person lift. Full-size humanoids need a crew, a crate and a plan; this one needs a van.
A Performer Out of the Box. Twenty or more built-in motions, an expression display, a speaker and a head touch sensor. Trigger a routine from the handheld remote, the AGIBOT Go app or your voice — no programming required to put on a show.
Real Bipedal Walking. 120 N·m maximum joint torque, up to 1.8 m/s in running mode, a 50 mm step and obstacle clearance and ±10° slope capability. It crosses a real floor, not a prepared one.
Power for Your Own Payload. 12 V/3 A and 48 V/5 A external power outputs let you hang your own hardware on it without a second battery.
Rugged Enough to Travel. Aluminium and magnesium alloy structure with high-strength engineering plastics and foamed polyurethane, rated from −10 °C to 40 °C, in a 873 × 561 × 443 mm case.
Hand Options Select your end effector configuration at checkout. Prices shown include a matched left and right pair; AGIBOT end effectors are also sold individually as standalone products.
AGIBOT’s X2 datasheet lists the X2 Neo with a dummy hand. Robo Inc. confirms that every AGILINK, BrainCo and Inspire hand in our catalogue is mechanically compatible with every X2, A3 and G2 variant — but on the Neo specifically, the wrist flange, adapter and firmware revision should be confirmed with us at order time rather than assumed. If a dexterous hand is central to your use case, the X2 Ultra is the configuration AGIBOT specifies for it.
The AGIBOT X2 Ultra shares the X2 shell and adds a 3D LiDAR, an RGB-D camera, front binocular and rear RGB cameras, a second head DOF, an NVIDIA Orin NX 16GB secondary development module, optional VR teleoperation, three USB-C ports and two RJ45 ports — and an 18-month warranty.
Specifications subject to change. All figures reflect AGIBOT manufacturer data current as of November 2026. For the most current information, custom configurations or volume pricing, contact .

AGIBOT X2 Neo Humanoid Robot
Active DOF
Max joint torque
Battery capacity
What's Included:
Robot Body
Battery + Charger
Handheld Remote
Microphone
User Guide
Certificate of Conformity

Performance and interaction
For performance, reception and interaction work.

Development and research
Adds the full sensor suite and an on-board development module.
The Neo has 30 DOF to the Ultra's 31, a front interactive camera where the Ultra adds LiDAR, RGB-D, binocular and rear cameras, and no secondary development module. Its warranty is 8 months against the Ultra's 18.
The X2 datasheet lists the Neo with a dummy hand, while AGIBOT's refresh brochure lists OmniHand and OmniPicker as optional across the X2 range. Confirm with Robo Inc. before ordering hands for a Neo.
Eight months.
By remote, the AGIBOT Go app, or voice.
Place Your Order
Order directly through our website or use the form below to connect with a product expert first. Delivery timelines depend on model availability, but we ship as quickly as possible — and we’ll keep you updated every step of the way.
Setup & Configuration
Every robot is different. Depending on your selected model and accessories, configuration can be plug-and-play or require a tailored setup. We offer optional demos, consultations, and ongoing support to ensure you’re up and running with confidence.
Get Up and GO
Once set up, your robot is ready to roll. Preloaded actions make it easy to get started, while manual controls and custom routines let you push the limits of what’s possible.
Historia cen
Jeden punkt danych na dzień, uśredniony według daty pomiaru.
Kwoty w USD
Średnie obliczane są dla każdej doby UTC na podstawie wszystkich zarejestrowanych cen ofert.

Agibot · Shanghai, CN
$25 600

Agibot · Barcelona, ES
$23 099

Agibot · Paderborn, DE
30 300 €

Agibot · Paris, FR
$29 999

Agibot · Barcelona, ES
$36 899

Agibot · Shanghai, CN
$44 560

Agibot · Los Angeles, US
od $53 999

Agibot · Paris, FR
$44 999

Agibot · Eindhoven, NL
od 99 000 zł

Agibot · Los Angeles, US
od $72 999

Agibot · Los Angeles, US
od $109 999

Agibot · Los Angeles, US
od $159 999
🍪 Preferencje plików cookie
Używamy plików cookie do pomiaru wydajności. Polityka prywatności