Gemiddelde prijs per dag
Bedragen in USD
Beschrijving
This is the same accessory cable found in the LIDAR-Lite v3. The LIDAR-Lite Accessory Cable is terminated with a simple 6-pin JST at one end and a bare wire pigtail at the other. You can use this cable as a replacement to the one you are currently using, as a backup in case of damage, or if you just need a second one. The LIDAR-Lite Accessory Cable is 200mm (~7.8in) long with specific pin-outs found on the second page of the Operation & Technical Manual below. Documents: Operation & Technical Manual Videos
This is the same accessory cable found in the LIDAR-Lite v3. The LIDAR-Lite Accessory Cable is terminated with a simple 6-pin JST at one end and a bare wire pigtail at the other. You can use this cable as a replacement to the one you are currently using, as a backup in case of damage, or if you just need a second one. The LIDAR-Lite Accessory Cable is 200mm (~7.8in) long with specific pin-outs found on the second page of the Operation & Technical Manual below. Documents: Operation & Technical Manual Videos
Prijsgeschiedenis
Gemiddeld prijsverloop
Eén gegevenspunt per dag, gemiddeld per waarnemingsdatum.
$6,60
Gemiddelden worden per UTC-dag berekend op basis van alle geregistreerde aanbiedingsprijzen.
Gerelateerde vermeldingen
Bearing Mount - Flat (1/4" Bore)
RoboSavvy
£5,42
Hub Adapter - 1.50" to 0.77"
RoboSavvy
£4,75
Hub Mount - Quad (Mount B)
RoboSavvy
£4,50
Hub Mount - Quad (Mount C)
RoboSavvy
£5,42
Motor Mount - E Style
RoboSavvy
£4,50
Pan/Tilt Bracket Kit (Multi Attachment)
RoboSavvy
£5,17
Planetary Gearmotor - 140RPM
RoboSavvy
£5,06
Precision Disc Wheel - 4" (Clear, 2 Pack)
RoboSavvy
£5,42
Servo Arm - Single (Hitec Standard Spline)
RoboSavvy
£4,50
Skate Wheel - 4.90 (Gray)
RoboSavvy
£4,50
Skate Wheel Adapter - Shaft Connection
RoboSavvy
£5,42
Ball Bearing Hub
RoboSavvy
£6,25