Gemiddelde prijs per dag
Bedragen in USD
Beschrijving
The SparkFun MicroMod Input and Display Carrier Board is a great way to add data and input visibility to your MicroMod project. Want to create your own embedded game? How about displaying data that is remotely collected and transmitted by your SparkFun MicroMod Weather Carrier Board and its processor? This is a great option.This carrier board combines a 2.4" TFT display six addressable LEDs onboard voltage regulator a 6-pin IO connector and microSD slot with the M.2 pin connector slot so that it can be used with compatible processor boards in our MicroMod ecosystem. We've also populated this carrier board with Atmel's ATtiny84 with 8kb of programmable flash. This little guy is preprogrammed to communicate with the processor over I2C to read button presses.MicroMod is a modular interface ecosystem that connects a microcontroller processor board to various carrier board peripherals. Utilizing the M.2 standard the MicroMod standard is designed to easily swap out processors on the fly. Pair a specialized carrier board for the project you need with your choice of compatible processor! Get Started with the MicroMod Input and Display Carrier Board Guide
The SparkFun MicroMod Input and Display Carrier Board is a great way to add data and input visibility to your MicroMod project. Want to create your own embedded game? How about displaying data that is remotely collected and transmitted by your SparkFun MicroMod Weather Carrier Board and its processor? This is a great option.This carrier board combines a 2.4" TFT display six addressable LEDs onboard voltage regulator a 6-pin IO connector and microSD slot with the M.2 pin connector slot so that it can be used with compatible processor boards in our MicroMod ecosystem. We've also populated this carrier board with Atmel's ATtiny84 with 8kb of programmable flash. This little guy is preprogrammed to communicate with the processor over I2C to read button presses.MicroMod is a modular interface ecosystem that connects a microcontroller processor board to various carrier board peripherals. Utilizing the M.2 standard the MicroMod standard is designed to easily swap out processors on the fly. Pair a specialized carrier board for the project you need with your choice of compatible processor! Get Started with the MicroMod Input and Display Carrier Board Guide
Prijsgeschiedenis
Gemiddeld prijsverloop
Eén gegevenspunt per dag, gemiddeld per waarnemingsdatum.
$60,92
Gemiddelden worden per UTC-dag berekend op basis van alle geregistreerde aanbiedingsprijzen.
Gerelateerde vermeldingen
Robotics Merit Badge Kit
RoboSavvy
£44,25
LIPO Battery 11.1V 1800mAh LB-012
RoboSavvy
£49,75
Serial Miniature OLED Module - 0.96" (uOLED-96-G2 GFX)
RoboSavvy
£43,08
Servo - Hitec HS-755HB (1/4 Scale)
RoboSavvy
£43
Stepper Motor - 29 oz.in (200 steps/rev, Threaded Shaft)
RoboSavvy
£41,93
ZIPPY - 5000mAh 3S1P 20C Battery - Hardcase Pack
RoboSavvy
£42,52
Beginner Kit for Arduino v3.0
RoboSavvy
£50,75
Multi-Chassis - 4WD Kit (ATV)
RoboSavvy
£34,50
RC Radio Remote 2.4Ghz 4Ch Tx & Rx V2 (Mode 2)
RoboSavvy
£54
Servo - Hitec HS-625MG (Standard Size)
RoboSavvy
£34,42
Servo - Hitec HS-646WP (Standard Size)
RoboSavvy
£52,75
SparkFun Experiential Robotics Platform (XRP) Controller - Beta
RoboSavvy
£37,43