휴머노이드 로봇

Atlas Humanoid Robot by Boston Dynamics | Capabilities & Specs — 사양, 가격 및 구매처 (2026)

The Atlas is a humanoid robot made by Boston Dynamics in Waltham, Massachusetts, USA. Price: $120,000 new. Key specs: 56 degrees of freedom, 30 kg payload, up to 4 hours battery life, 190 cm height, 90 kg weight, 8 km/h max speed. Early production, limited release: contact Boston Dynamics for orders. Used units are not yet on the secondary market, but may appear on Robot Overflow in the future.

💰가격
$120,000
🌍원산지
US
📏높이
190 cm
⚖️무게
90 kg
🦾자유도
56
🏃최대 속도
8 km/h
📦적재 용량
30 kg
🔋배터리
Up to 4 hours
🛒구매 가능 여부
구매 가능

What is the Atlas?

The Atlas is Boston Dynamics’ advanced, fully electric humanoid robot, designed for real-world industrial and automation tasks. Manufactured in Waltham, Massachusetts, it combines dynamic mobility, intelligent perception, and dexterous manipulation with 56 degrees of freedom. Its 360° vision system and IP67 rating enable operation in harsh environments. Atlas can walk at 9 km/h, carry 30 kg, and run for up to 4 hours on a charge. Unlike its hydraulic predecessor, the current generation (2024) uses fully electric actuators for quieter, more efficient movement. Boston Dynamics targets manufacturing, logistics, and warehouse applications, with early production units available through the company’s enterprise integration platform, Orbit.

Specifications

Here are the full technical specifications.

SpecValue
Height190 cm
Weight90 kg
Degrees of freedom56
Battery lifeUp to 4 hours
Max speed8 km/h
Payload30 kg
Price (new)$120,000
Price (used range)N/A (limited release)

Price & Value

New MSRP: $120,000

Used range: N/A (limited release, no secondary market yet)

At $120,000, the Atlas humanoid sits at the premium end of industrial robotics, justified by its peerless dynamic mobility and Boston Dynamics’ decades of R&D. There is no used market pricing yet due to limited production, but if demand grows, depreciated units could settle around $60,000–80,000 after several years of service. For a single robot, the cost compares favorably against two or three fixed industrial arms plus an AGV, given Atlas’s versatility—it can walk, manipulate, and inspect in one package. Total cost of ownership must factor in Orbit software integration, periodic maintenance on 56 electric joints, and site-specific safety assessments. No lease or rental options are available, so the full capital outlay is required upfront. Buyers should view Atlas less as a commodity and more as a strategic automation investment with a potential 3–5 year payback in labor savings and process flexibility.

Who Is It For?

Best for: - Industrial manufacturing lines requiring flexible, mobile manipulation (30 kg payload, 360° vision, IP67) - Logistics warehouses needing a robot that can walk, climb stairs, and palletize in dynamic layouts - Research labs exploring humanoid locomotion, AI-vision integration, and advanced manipulation (56 DOF, potential DeepMind AI integration) - Harsh-environment facilities (foundries, chemical plants) that can exploit Atlas’s IP67 rating and rugged titanium/aluminum frame

Not for: - Small businesses or labs with budgets under $100,000—the $120,000 price tag plus integration costs are prohibitive - Heavy outdoor construction where a 30 kg payload may be insufficient for moving structural materials - Operations requiring 24/7 uptime without breaks—the 2–4 hour battery life means frequent charging or swappable battery policies are needed

Alternatives & Comparison

Atlas competes with a growing field of general-purpose humanoids, though few can match its dynamic athleticism and robust industrial pedigree.

ModelPriceAvailableKey Difference
Tesla OptimusUndisclosed (expected $20,000–$30,000)noFar lower target cost, Tesla ecosystem integration, but still in prototyping—no commercial availability yet
Agility Digit$250,000yesLogistics-optimized, smaller footprint, but limited manipulation dexterity and higher price
Figure 02Undisclosed (competitive range)preorderAdvanced AI-driven dexterity, full humanoid form, but no proven field experience or IP rating disclosed

Verdict: For buyers who need a proven, rugged, and immediately deployable humanoid for dynamic industrial tasks, Atlas is the clear winner—its IP67 rating and electric actuator reliability give it a head start. If you can wait 12–18 months and prioritize low unit cost, Tesla Optimus could disrupt the market at a fraction of the price. Agility Digit is a better fit if your primary need is logistics and you have the budget for a specialized platform; for general-purpose AI integration testing still in development, Figure 02 may catch up but remains unproven.

Use Cases & Capabilities

Industrial Manufacturing Assistance

Atlas navigates factory floors using its 360° vision and dynamic walking, locating machinery and tools without the need for floor-level guidance systems. It can lift up to 30 kg, place components into CNC machines, and perform quality checks with its tactile hands. The IP67 rating allows it to work through dust, coolant spray, and occasional washdowns, making it suitable for metal fabrication and automotive assembly lines. Limitation: repetitive high-speed pick-and-place cycles are still better served by traditional robotic arms.

Logistics and Warehousing

In a bustling distribution center, Atlas can walk between aisles, climb stairs to mezzanines, and palletize boxes of various sizes. Its ability to perceive and adapt in real time reduces the need for pre-mapped routes, allowing deployment in facilities that evolve daily. Battery life of 4 hours typical operation means it can cover an entire shift with a single charge break. However, for pure box-moving throughput, a fleet of dedicated AGVs may still offer better speed per dollar.

Harsh Environment Inspection

With an IP67 ingress protection rating and a titanium/aluminum structure, Atlas can enter high-temperature, wet, or corrosive areas that are hazardous for humans. Equipped with its 360° vision system and potential sensor payloads, it performs routine rounds to check gauges, detect leaks, and report anomalies without human exposure. This reduces safety man-hours in foundries, chemical processing plants, and offshore platforms. The challenge remains that Atlas’s electric actuators may require more frequent maintenance in extremely corrosive atmospheres.

Research and AI Development Platform

Universities and corporate R&D labs use Atlas to push the boundaries of whole-body motion planning, reinforcement learning, and human-robot interaction. The 56 DOF and tactile hands provide a rich testbed for dexterous manipulation algorithms, while the potential integration with LLMs via DeepMind partnerships opens avenues for natural language tasking. Although the $120k price is steep for most academic budgets, a few well-funded labs have secured units, securing valuable data for the broader robotics community.

History & Background

Boston Dynamics was founded in 1992 as a spin-off from MIT’s Leg Lab, initially focused on legged robots like BigDog. The first Atlas was revealed in 2013 for DARPA’s Robotics Challenge, powered by hydraulic pumps and tethered for power. Over several generations, Atlas learned to run, jump, and do backflips, becoming an internet sensation. In 2024, the company unveiled the fully electric Atlas—a complete redesign that swapped noisy hydraulics for custom electric actuators, yielding a sleeker white-and-blue look and a quieter, more energy-efficient platform. Ownership transitions shaped the company: Google acquired it in 2013, SoftBank in 2017, and Hyundai Motor Group in 2021. The electric Atlas is the first iteration purpose-built for commercial sale, entering early production with select enterprise partners in 2024–2025, and ramping availability into 2026.

Buying Used — What to Check

Verify actuation hours and maintenance logs Electric actuators have limited cycle lives; early adopters may have pushed units hard in testing, so a low-hour unit is critical.

Confirm Orbit software license transfer Enterprise integration software may be tied to the original customer account, adding cost if not transferable.

Inspect frame and joint for impact damage Despite IP67, falls or collisions during dynamic tasks can bend titanium or aluminum components, compromising safety.

자주 묻는 질문

The list price for a new Atlas is $120,000 USD, as quoted by Boston Dynamics. There are currently no leasing or rental options; all sales are direct from the manufacturer.
Atlas can walk at up to 9 km/h, carry a 30 kg payload, and perform dynamic maneuvers like jumping and backflips. It uses 360° vision and tactile hands for manipulation tasks in industrial settings, ranging from machine tending to palletizing.
Yes, Atlas is in early production and available for purchase through Boston Dynamics’ enterprise sales team. Lead times vary, but as of 2026, select partners are receiving units. Contact Boston Dynamics directly for a quote.
Atlas offers proven dynamic mobility (9 km/h walk, IP67) at a confirmed $120k price, while Optimus targets a consumer-level below $30k but remains in prototype testing with no commercial release date. Atlas is the only one you can deploy on a factory floor today.
Height: 190 cm. Weight: 90 kg. Degrees of freedom: 56. Max speed: 8 km/h (walking 9 km/h). Payload: 30 kg. Battery life: ~4 hours typical, ~2 hours heavy use. IP rating: IP67. Sensors: 360° vision, tactile hands.
Boston Dynamics, a US robotics company founded in 1992 and headquartered in Waltham, Massachusetts. It is currently a subsidiary of Hyundai Motor Group.
Atlas runs approximately 4 hours under normal use and about 2 hours under heavy loads and dynamic maneuvers. Battery swap capability and recharge time are not publicly detailed.
Primary industries include automotive and general manufacturing, logistics, and warehousing. Its IP67 rating also suits harsh environments like foundries and chemical plants for inspection and light maintenance tasks.
Boston Dynamics states Atlas is safe to work alongside humans, with advanced perception and motion planning that avoids collisions. However, as with all industrial robots, a site-specific risk assessment and safety barrier policies are recommended.
No, because Atlas is still in early production, there are no verified used units in the market. Future availability on platforms like Robot Overflow may occur as early adopters cycle out first-generation electric units.

Boston Dynamics Atlas in 3D

Loading the 3D model…
Drag to rotate · click the model, then scroll or pinch to zoom · click a part to inspectSwipe sideways to turn · pinch to zoom · tap a part to inspect3D model credit and licence

Boston Dynamics Atlas supply chain

Point at or select a step to light up its chain: bright lines are its direct links, softer lines the rest of the path from raw material to robot.

Swipe sideways to follow the whole chain.

ExtractionRefiningMaterialsComponentsModulesRobotsCompaniesMined copper is smelted and refined.Primary aluminium from smelters.Bauxite is refined to alumina for aluminium.6061 aluminium contains 0.8–1.2% magnesium.6061 aluminium contains 0.40–0.8% silicon.Schaeffler's humanoid rotary actuators combine an electric motor, integrated power electronics and an encoder with a planetary or strain-wave gear (April 2026).Joint actuators are built around an electric motor; frameless torque motors are built directly into robot joints.Crossed-roller bearings at the joint outputs are stated by the makers of Unitree's G1, H1, H2 and R1, EngineAI's PM01 and T800, Booster's T2 and Noetix's N2; many other makers do not say.Some humanoid makers use linear actuators (which push and pull in a straight line) with planetary roller screws: Tesla showed them in its 2022 Optimus (AI Day 2022), and China Daily reports Shuanglin's screws in more than 20 joints of XPeng's IRON. Most makers do not say.Camera units are built around image sensors (CMOS image sensors from makers such as Sony and OmniVision).Some humanoids use ball-screw linear actuators: PAL says KANGAROO's linear actuators are based on ball screws, and an Apptronik patent application describes a humanoid linear actuator with a ball screw. Most makers do not say.Silicon metal is made from silica in natural forms such as quartzite (USGS).Silicon metal can be refined further into ultra-high-purity semiconductor-grade silicon, called polysilicon (USGS). Chips are made on wafers: thin slices of crystalline silicon (Wikipedia).Magnesium is recovered from dolomite, serpentine, magnesium-bearing evaporite minerals and brines (USGS).Steel is made from iron ore: US mines shipped 98% of their usable iron ore to the steel industry (USGS).The flexspline is a thin-walled steel cup and the circular spline a rigid steel ring (Harmonic Drive Systems).Nook's planetary roller screws have a screw shaft of induction-hardenable alloy steel and rollers and nut of bearing steel.isel rolls its ball screws from CF 53 steel and induction-hardens them (HRC 60±2).Precision bearing rings are made of through-hardened chromium bearing steel 100Cr6 (SAE 52100) (GMN).Sony makes its CMOS image sensors in its own production facilities in Japan (Nagasaki, Kumamoto). SIA/BCG count optoelectronics and sensors in one fab group with discrete and analog chips (DAO), apart from logic.Mined nickel ore and concentrate go to smelters and refineries. In Indonesia, laterite ore is processed into nickel pig iron and ferronickel for stainless steel, or into battery intermediates such as mixed hydroxide precipitate (IEA); the US Eagle Mine's concentrate is exported to smelters (USGS).Stainless steel is the biggest use of nickel, 66% of demand in 2025 (Cobalt Institute). In the US, stainless and alloy steels and nickel alloys take more than 85% of nickel use (USGS). The world made 64.2 Mt of stainless steel in 2025 (worldstainless), against about 1,900 Mt of raw steel (USGS).Boston Dynamics is vetting Hwashin Precision to make light aluminium structures for Atlas's legs and body (Korea Herald, June 2026).Solder is the largest use of tin, 51% of world tin use in 2023 (International Tin Association; in the US solder took 11%, USGS). The common lead-free alloy SAC305 is 96.5% tin (AIM).Tin-lead solder is nearly half lead (PubChem), but the electronics industry has moved toward lead-free solders (USGS): 92% of solder for electronics was lead-free in 2023 (ITA).The lead-free alloy SAC305 contains 3% silver (AIM). In the US, brazing and solder took 3% of silver (USGS).The lead-free alloy SAC305 contains 0.5% copper (AIM).FR-4 laminate is woven fibreglass cloth with an epoxy binder (Wikipedia), and fibreglass is made from silica sand (Covia).A thin layer of copper foil is laminated to one or both sides of an FR-4 panel; these are called copper-clad laminates (Wikipedia; ChinaBaogao).FR-4 epoxy resin systems typically use bromine to resist fire (Wikipedia); a grade of the brominated flame retardant TBBPA is used to make epoxy resins for circuit boards (Wikipedia). Brominated flame retardants are one of bromine's two leading uses (USGS).Barite is used to make barium carbonate, which goes into dielectrics (Wikipedia). Barium titanate, the dielectric ceramic used in capacitors, can be made by heating barium carbonate with titanium dioxide (Wikipedia).Barium titanate, the ceramic in high-capacitance MLCCs, can be made by heating barium carbonate with titanium dioxide (Wikipedia); titanium dioxide comes from ilmenite and rutile (USGS).99% of MLCCs made worldwide use base-metal electrodes of nickel or copper; the industry moved from palladium and silver to cut cost (NASA, 2015). TDK replaced palladium electrodes with nickel in 1993 (Wikipedia).Platinum-group metals are used in multilayer ceramic capacitors (USGS). High-reliability MLCCs use palladium-silver electrodes (NASA, 2015).High-reliability MLCCs use precious-metal electrodes of palladium and silver (NASA, 2015).Connector contacts are copper alloys: beryllium copper is called the best copper alloy for contacts, connectors and cables (Wikipedia), and phosphor bronze (copper-tin-phosphorus) can replace it (USGS).Copper-clad laminate is the core material of circuit boards (ChinaBaogao); FR-4 is a common material for printed circuit boards (Wikipedia).Parts are soldered onto bare boards: Adafruit's BNO055 board is a "breakout PCB", and the Raspberry Pi Zero 2 W brief warns against damage to the printed circuit board.SAC305 lead-free solder is made for soldering printed circuits, by wave, hand and SMT reflow soldering (Conro; AIM).MLCCs store and release charge and absorb noise in phones, home appliances and IoT devices (Murata). The Raspberry Pi's RP3A0 package includes the decoupling capacitors that smooth its supply voltage (Raspberry Pi).Boards carry connectors: the Raspberry Pi Zero 2 W brief speaks of the board and its connectors, and Waveshare's servo adapter has a USB-C connector and a power connector.NVIDIA's Jetson Thor modules are 100 × 87 mm and plug in through a 699-pin board-to-board (B2B) connector (NVIDIA).Schaeffler's humanoid actuators have electric motors with integrated power electronics (Schaeffler). In the Unitree G1, a round circuit board drives each joint motor (China Post Securities teardown).Brass is copper and zinc: CW614N free-cutting brass is about 39% zinc. In the US, brass and bronze are the second use of zinc after galvanized steel.Brass is mostly copper: 57–59% in CW614N free-cutting brass.Free-cutting brass such as CW614N holds 2.5–3.5% lead so it machines cleanly; lead-free brasses exist.XT30 battery plugs (G1 harness, Open Duck Mini) have gold-plated brass contacts.Antimony is used in circuit boards to cut flammability further. A review lists two studies of scrap PC boards, parts and solder still on, with 0.45% and 1.97% antimony, so the share in the laminate alone is not known.ASML's DUV machines, 'the workhorses of the industry', print the majority of layers in chips, older-generation chips included (ASML annual report 2025).Boston Dynamics (Hyundai Motor Group) makes this robot.Boston Dynamics (Jan 2026): Hyundai Mobis will supply the actuators for Atlas. Hyundai Motor Group: Mobis develops and supplies the precision actuators that are core Atlas components.Atlas is designing in the NVIDIA Jetson Thor computing platform (Boston Dynamics, Mar 2025; NVIDIA, Aug 2025).360° camera view plus tactile sensing (camera supplier not named).Atlas's newest hand has dense pressure tactile sensors over the fingertips and palm.The frame, shells and covers that make up the Boston Dynamics Atlas's body.Atlas swaps its own batteries at a charging station (about 3 minutes; 4 hours of work per set) (Boston Dynamics).Quartz and silica sandQuartz and silica sandMagnesium ores and brinesMagnesium ores and brinesSteel (gear, bearing andstainless grades)Steel (gear, bearing and stainless grades)Lithography machines (chipprinting)Lithography machines (chip printing)Mature-node chipfabrication (28 nm and…Mature-node chip fabrication (28 nm and older; analog and sensor chips)Aluminium alloysAluminium alloysCopper smelting andrefiningCopper smelting and refiningAlumina refining andaluminium smeltingAlumina refining and aluminium smeltingCopper miningCopper miningBauxite miningBauxite miningIron ore miningIron ore miningMagnesium smeltingMagnesium smeltingSilicon metal smeltingSilicon metal smeltingHarmonic (strain-wave)reducersHarmonic (strain-wave) reducersPlanetary roller screwsPlanetary roller screwsBall screwsBall screwsPrecision bearingsPrecision bearingsFrameless torque motorsFrameless torque motorsImage sensorsImage sensorsTactile sensorsTactile sensorsRobot joint actuatorsRobot joint actuatorsAI compute modulesAI compute modulesCameras and depth camerasCameras and depth camerasBoston Dynamics AtlasBoston Dynamics AtlasBoston DynamicsBoston DynamicsNickel miningNickel miningNickel smelting andrefiningNickel smelting and refiningTitanium minerals(ilmenite and rutile)Titanium minerals (ilmenite and rutile)Tin miningTin miningLead miningLead miningSilver miningSilver miningPalladium mining(platinum-group metals)Palladium mining (platinum-group metals)Antimony miningAntimony miningBromine (from brines)Bromine (from brines)Barite mining (barium)Barite mining (barium)Solder (tin alloys:lead-free SAC and…Solder (tin alloys: lead-free SAC and tin-lead)Copper-clad laminate (FR-4glass-fibre epoxy board…Copper-clad laminate (FR-4 glass-fibre epoxy board material)Printed circuit boards(bare boards)Printed circuit boards (bare boards)Multilayer ceramiccapacitors (MLCC)Multilayer ceramic capacitors (MLCC)Connectors and wiringharnessesConnectors and wiring harnessesElectronics assembly(circuit boards with part…Electronics assembly (circuit boards with parts soldered on)Structure: Boston DynamicsAtlasStructure: Boston Dynamics AtlasZinc miningZinc miningBrass (copper-zinc alloy)Brass (copper-zinc alloy)Atlas battery packs(swappable)Atlas battery packs (swappable)

사진4

Atlas Humanoid Robot by Boston Dynamics | Capabilities & Specs photo 1
Atlas Humanoid Robot by Boston Dynamics | Capabilities & Specs photo 2
Atlas Humanoid Robot by Boston Dynamics | Capabilities & Specs photo 3
Atlas Humanoid Robot by Boston Dynamics | Capabilities & Specs photo 4