Dynamixel XM430-W210-T Servo

Name: Dynamixel XM430-W210-T Servo
Brand: Robotis
SKU: 6d2ea78b-88c2-4496-9981-582c3d03830e
Price: 317.4 EUR
Availability: InStock

Robotis | A-000000-02763

€317.40 VAT incl. €264.50 VAT excl.

Including €0.01 for ecotax

Discover the Dynamixel XM430-W210-T servo, offering versatility, full control, a high transmission rate and a TTL interface.

Quantity

48 Available

Get it in 24/48h! (see T&C)

Ask for a quote

Create a cart and turn it into a quote instantly!

Payment methods (see T&C)

XM430-W210-T servo from Robotis: optimised at all levels

With its upgraded ergonomics to relief strain on the cables and avoid inserts, its streamlined energy consumption and its aluminium heat sink, the Dynamixel XM430-W210-T servo will delight robotics enthusiasts.

What’s more, you’ll have full control over speed, position, torque, trajectory, etc... PWM control included!

XM430-W210-T: a Dynamixel servo that’s ready for anything

Suitable for all sorts of creations fitted with complex joints (articulated hands, robotic insects, humanoid robots, etc.), the XM430-W210-T servo offers various mounting options, being compatible with a great many assembly parts and many connection configurations.

This versatile, lightweight and energy-efficient servo is the perfect choice for your most elaborate robots!

Technical specifications of the 902-0125-000 actuator

Included with the Dynamixel XM430-W210-T servo:
- 1x HN12-N101 horn assembly
- 1x Teflon washer (for horn assembly)
- 1x 180 mm X4P cable
- 1x 180 mm X3P cable (convertible)
- 16x Wrench Bolt M2.5*4 screw
- 1x Wrench Bolt M2.5*6 screw
- 10x Wrench Bolt M2*3 screw
- 8x spacer ring
Specifications:
- Weight: 82g
- Dimensions: 28.5 × 46.5 × 34 mm
- Reduction ratio: 212.6: 1
- Starting torque (N.m): 2.7 @ 11.1V; 3 @ 12V; 3.7 @ 14.8V
- Starting current (A): 2.1 @ 11.1V; 2.3 @ 12V; 2.7 @ 14.8V
- No-load speed (RPM): 70 @ 11.1V; 77 @ 12V; 95 @ 14.8V
- ST CORTEX-M3 processor (STM32F103C8 @ 72 MHz, 32 bit)
- Absolute contactless encoder (12 bit, 360°)
- Coreless motor
- Resolution: 0.088° x 4,096
- Operating range:
- In position control mode: 360°
- In speed control mode: endless rotation
- Input voltage: 10~14.8V (recommended: 12V)
- Operating temperature: -5 to 80°C
- Control signal: digital packets
- Protocol: half-duplex asynchronous serial communication (8 bit, 1 stop, no parity)
- Physical connection: TTL multi-drop bus
- Addresses: 253 IDs (0~252)
- Transmission rate: 9,600 bps~4.5 Mbps
- Feedback: position, velocity, current, real-time tick, trajectory, temperature, input voltage, etc.
- Case in metal and engineering plastic
- Metal gears
- Standby current: 40 mA

How to choose the right Dynamixel servomotor?

Resources for the Dynamixel 902-0125-000 actuator

As usual, we’ve compiled for you all the information you need to know about the Dynamixel XM430-W210-T servo:

Dynamixel 902-0125-000 actuator e-guide
RoboPlus software (R+)
IDE OpenCM
Schematics (en)
Software (en)
Compatibility guide (en)
Selection guide (en)
Dynamixel SDK (en)

My Dynamixel servomotor is not detected, what can I do about it ?

Check that your Dynamixel servomotor is correctly configured. Do not hesitate to re-flash it with the ROBOTIS Software Roboplus. After re-flash remember to re-configure it. If the issue is not solved, contact us for an advanced support.

My motor works but it seems like there is an offset. Why ?

The motor is probably not well mounted. Check that you correctly mounted the horns by respecting the mark.

My Dynamixel servomotor seems blocked. I can't turn it even when it is not alimented.

There is probably a mechanical issue with the Dynamixel servomotor. You can directly contact us to get more advance support.

My Dynamixel servomotor is not working properly.

Check your power supply and the system cabling (try with a different servomotor). You can also reset the servo. If nothing works, the best solution is to go through the Dynamixel servomotor checklist!

What is the difference between Protocol 1.0 and Protocol 2.0?

The 1.0 protocol is dedicated to the Dynamixel AX and MX series. Protocol 2.0 is for the X and Dynamixel Pro series. Protocol 2.0 control tables include PID controls which allow for more precise adjustment of the servo motor movements. Protocol 2.0 can be updated on MX series servo motors. You can refer to the protocol 1.0 and protocol 2.0 pages for more informations.

가격 변동 내역