តម្លៃមធ្យមប្រចាំថ្ងៃ
ចំនួនទឹកប្រាក់ជារូបិយប័ណ្ណ USD

The AGILINK OmniHand 3 Ultra is the flagship: 21 active degrees of freedom, a 0.4 s open-close cycle and ±0.1 mm repeatability. Sensing is full-hand piezoresistive 1D tactile across the fingers, the pads and the palm. Order a single left or right hand, or the matched pair.
Compatible with:
The AGILINK OmniHand 3 Ultra is the top of the AGILINK range: 21 active degrees of freedom, every one directly motor driven, in a 900 g hand that grips a rated 3 kg and lifts 8 kg. Fingertip repeat positioning is ±0.1 mm and a full open-close cycle takes 0.4 s. This is the hand for dexterous manipulation research, teleoperation and in-hand work a tendon-driven five-finger design cannot do.
This listing is the Tactile model. Sensing is piezoresistive full-hand one-dimensional tactile across the fingers, pads and palm, resolving to 0.1 N over a 0–20 N range, triggering from about 5 gf. The hand reports contact force everywhere it touches.
Twenty-One Active Joints, Directly Driven. Not a four-motor hand with passive linkages — full independent articulation, which is what in-hand reorientation, tool use and fine assembly actually require.
Force Coverage Across the Whole Hand. Tactile sensing spread over fingers, pads and palm rather than concentrated at the fingertips. For grasp stability, in-hand repositioning and knowing when a part has seated, breadth of contact data matters more than resolution at a single point.
3 kg Gripped, 8 kg Lifted. Rated grip of 3 kg with an 8 kg lifting capacity, on 48 V with CAN-FD and Ethernet, across a −10 to 45 °C operating range and OTA firmware upgrades.
Left, Right or the Matched Pair. Order a single left or right hand, or the matched pair.
AGILINK is AGIBOT’s dexterous manipulation arm. Every hand and gripper in the AGILINK range ships with a Python and C++ SDK and runs under ROS 2.
The OmniHand 3 covers most manipulation work at 16 total DOF and 3 kg with 1D tactile sensing, for a fraction of the Ultra’s price. The OmniHand 3 Lite-S drops to 350 g for half-scale platforms, and the OmniPicker 3 gripper handles straight pick-and-place at 140 N and 5 kg maximum.
Specifications subject to change. Figures reflect AGIBOT’s quotation of 1 November 2026 and the AGILINK flyer of 3 November 2026. For custom configurations or volume pricing, contact .




AGILINK OmniHand 3 Ultra Dexterous Hand (Tactile)
AGIBOT’s AGILINK flyer of 3 November 2026 lists a single OmniHand 3 Ultra — 21 active degrees of freedom, 900 g — in three sensing configurations: non-tactile, tactile and vision-tactile. This listing is the tactile build, and it is the only one we stock.
21 active degrees of freedom against 10 active and 6 passive, a 0.4-second open and close against 0.5, and ±0.1 mm repeat positioning against ±0.3 mm. It reads contact force across the whole hand, where the OmniHand 3 publishes a sensor type but no array. It is heavier, at 900 g against 570 g, and it grips a rated 3 kg with an 8 kg lifting capacity.
It is sold as a single hand. Choose left or right. Order both for a pair.
Piezoresistive one-dimensional tactile sensing across the fingers, the pads and the palm, resolving to 0.1 N over a 0–20 N range and triggering from about 5 gf.
Robo Inc. We are a US distributor for AGIBOT.
Place Your Order
Order directly through our website or use the form below to connect with a product expert first. Delivery timelines depend on model availability, but we ship as quickly as possible — and we’ll keep you updated every step of the way.
Setup & Configuration
Every robot is different. Depending on your selected model and accessories, configuration can be plug-and-play or require a tailored setup. We offer optional demos, consultations, and ongoing support to ensure you’re up and running with confidence.
Get Up and GO
Once set up, your robot is ready to roll. Preloaded actions make it easy to get started, while manual controls and custom routines let you push the limits of what’s possible.
ប្រវត្តិតម្លៃ
មានចំណុចទិន្នន័យមួយក្នុងមួយថ្ងៃ គណនាមធ្យមតាមកាលបរិច្ឆេទសង្កេត។
ចំនួនទឹកប្រាក់ជារូបិយប័ណ្ណ USD
តម្លៃមធ្យមត្រូវបានគណនាតាមថ្ងៃ UTC ពីតម្លៃនៃការផ្តល់ជូនដែលបានកត់ត្រាទាំងអស់។

Agibot · Paris, FR
$23,999

Agibot · Eindhoven, NL
ចាប់ពី 19,900 zł

Agibot · Los Angeles, US
ចាប់ពី $6,999

Agibot · Los Angeles, US
ចាប់ពី $1,009

Agibot · Paris, FR
ចាប់ពី $899

Agibot · Paris, FR
$6,999

Agibot · Paris, FR
$5,999

Agibot · Shanghai, CN
ចាប់ពី $699

Agibot · Shanghai, CN
ចាប់ពី $999

Agibot · Shanghai, CN
ចាប់ពី $6,599

Agibot · Barcelona, ES
$3,299

Agibot · Paris, FR
$9,550
🍪 ចំណូលចិត្តខូគី
យើងប្រើខូគីដើម្បីវាស់ស្ទង់ប្រសិទ្ធភាព។ គោលការណ៍ឯកជនភាព