| Brand | Unitree Robotics |
|---|
| Model | R1 EDU Pro A (U3); Unitree name: R1 EDU |
|---|
| Robot type | Bipedal humanoid robot |
|---|
| Size, standing | 1230 × 357 × 190 mm (height × width × thickness) |
|---|
| Size, folded | 690 × 450 × 300 mm |
|---|
| Weight | About 29 kg with battery |
|---|
| Colours | White or red; creative stickers to change the look |
|---|
| Body joints | 26 joint motors: 6 per leg, 5 per arm, 2 in the waist, 2 in the head |
|---|
| Total degrees of freedom | 40 (26 body joints + 14 active hand joints) |
|---|
| Leg and arm length | Calf + thigh 600 mm; forearm + upper arm 420 mm |
|---|
| Range of motion | Knee −10° to +139°; hip yaw ±157°, pitch −168° to +146°, roll −60° to +100°; waist yaw ±150°, roll ±30°; head yaw ±115°, pitch ±36° |
|---|
| Arm payload | About 2 kg per arm, varies greatly with arm posture |
|---|
| Drive | Low-inertia, high-speed inner-rotor PMSM joint motors; crossed roller and ball bearings; dual + single encoders; hollow internal wiring; local air cooling |
|---|
| Dexterous hands | 2 × Unitree Dex3-1 |
|---|
| Hand type | Three-finger, 7 DOF per hand |
|---|
| Hand drive | Force control: 6 direct-drive + 1 gear-drive micro brushless joints per hand |
|---|
| Touch sensing | Not included (the Pro B's Dex3-1 hands carry 33 pressure sensors each) |
|---|
| Hand size and weight | Confirm at quote; Unitree's figures for the Dex3-1 with sensors: 175 × 88 × 77 mm, 710 g, ±2 mm fingertip repeatability, 500 g grasp load |
|---|
| Hand connections | Each hand connects to XT30 power, a signal port and a camera port on the backpack's dexterous-hand expansion module |
|---|
| Camera | Binocular depth camera in the head, 146° × 124° field of view; RGB 1280 × 720 at 30 Hz, depth 544 × 448 at 10 Hz |
|---|
| Computing | 8-core high-performance CPU + 10 TOPS visual computing module |
|---|
| Computing backpack | NVIDIA Jetson Orin, 100 TOPS (development computing unit) |
|---|
| Audio | 4-microphone array; stereo speakers, 3 W × 2 |
|---|
| Voice and image AI | Voice and image interaction through a large multimodal model when online; wake phrase "Hello Robot" or press-to-talk |
|---|
| Status light | 256-colour RGB chest light showing the robot's state |
|---|
| Wireless | Wi-Fi 6, Bluetooth 5.2 |
|---|
| Top panel | XT30 power outputs 24 V / 3 A and 36 V / 5 A; RJ45 gigabit Ethernet; stand-up / lie-down button |
|---|
| Battery | Quick-release smart battery, 6000 mAh |
|---|
| Run time | About 1 h per battery (less with fast walking, load or uneven ground) |
|---|
| Charger | 100–240 V input; 38 V, 3 A, 114 W output; about 1.5 h per charge, battery charged outside the robot |
|---|
| Remote control | Hard emergency-stop button and soft stop (L2 + B); 780 mAh, about 5 h; more than 100 m in an open environment |
|---|
| Control and updates | Unitree Explore app (iOS, Android), remote control and voice; smart OTA upgrades |
|---|
| Built-in actions | Running mode (low or high speed); dance modes including Kung Fu, Jeet Kune Do and Twist; gestures such as handshake, wave and clap |
|---|
| Secondary development | unitree_sdk2 in C++ and Python on DDS; compatible with ROS 2 (Foxy, Humble); high-level and joint-level control |
|---|
| Simulation models | URDF, STEP and MuJoCo models of the R1 |
|---|
| Navigation | Optional LiDAR for Unitree's SLAM and navigation service (static, flat indoor spaces under 45 m) |
|---|
| Operating environment | 0–40 °C on flat ground; not waterproof, not dustproof |
|---|
| Warranty | 12 months |
|---|
| In the box | The robot in a hard transport case, a quick-release R1 smart battery, the charger and charging cable, a remote control with emergency stop, a stand set (base, support rod, bracket, quick-release clamp, wave washer and protective foam), a calibration steel shaft, body stickers and the user manual; as an R1 EDU, the computing backpack with its NVIDIA Jetson Orin module (100 TOPS), expansion rails, screws, the dexterous-hand expansion module and its leads; two Unitree Dex3-1 hands with fixing brackets, camera brackets and cables. Full packing list confirmed with your quotation |
|---|