Skip to product information
1 of 5
  • DYNAMIXEL MX-106R
  • DYNAMIXEL MX-106R
  • DYNAMIXEL MX-106R
  • DYNAMIXEL MX-106R
  • ROBOTIS Dynamixel

DYNAMIXEL

DYNAMIXEL MX-106R

DYNAMIXEL MX-106R

Regular price $689.89
Regular price Sale price $689.89
Sale Sold out
Shipping calculated at checkout.
SKU: 902-0066-000
Weight: 0.7 lb
Shipping: Calculated at Checkout
Axial load limit: 20N
Backlash: 20 arcminutes
Communications protocol: RS485
Dimensions: 40.2x65.1x46mm
Estimated rated torque: 1.68Nm
Estimated rated torque disclosure : This is an estimated value for continuous torque, calculated at 20% of stall torque.
Input voltage: 12v
No load rpm: 45RPM
Operating modes: Current Control Mode, Velocity Control Mode, Position Control Mode, Extended Position Control Mode, Current Based Position Control Mode, PWM Control Mode
Radial load limit: 40N
Resolution: 4096 Steps
Size: MX106
Special features: Dual Joint Port
Stall current: 5.2A
Stall torque: 8.4Nm
Standby current: 100mA
Supported baudrades: 8,000 ~ 4.5MBaud
Weight: 153g
View full details
DYNAMIXEL MX-106R DYNAMIXEL MX-106R DYNAMIXEL MX-106R ROBOTIS Dynamixel
  • Overview
  • Reviews

Overview

Features

DYNAMIXEL is a robot exclusive smart actuator with fully integrated DC Motor + Controller + Driver + Sensor + Reduction Gear + Network in one DC servo module.

MX-series is a new concept of DYNAMIXEL with advanced functions, such as precise control, PID control, 360 degree of position control, and high speed communication.

Advanced durability, degree of precision, and wider control zone were achieved thanks to the newly applied CONTACTLESS ABSOLUTE ENCODER

360 degrees POSITION CONTROL without dead zone

4,096 PRECISE RESOLUTION by 0.088 degrees

SPEED CONTROL at ENDLESS TURN MODE

Reliability and accuracy were advanced in the position control through PID CONTROL

High baud rate up to 4.5Mbps

Torque control via current sensing

Supports dual mode for master/slave method

Package Components
MX-106R 1
HN05-N102 1
Thrust Washer (for horn) 1
4P Cable 200mm 1
3P-Sync Cable 160mm 1
Wrench Bolt WB M2.5*4 16
Wrench Bolt WB M3*8 1
Nut M2.5 18
Caution

*NOT compatible with the HN05-N101 Set / T101 Set.

Specification

Reviews

تاریخچهٔ قیمت

تاریخچهٔ میانگین قیمت

برای هر روز یک نقطهٔ داده؛ میانگین‌گیری بر اساس تاریخ مشاهده انجام شده است.

میانگین روزانهٔ قیمت

مبالغ به USD

$۶۸۹٫۸۹
نمودار تاریخچهٔ میانگین قیمت (به USD)نمودار خطیِ 61 مشاهده از ۱۰ مهر ۱۴۰۵ تا ۱ آذر ۱۴۰۵.$۶۸۹٫۹۲$۶۸۹٫۹۱$۶۸۹٫۹۰$۶۸۹٫۸۹$۶۸۹٫۸۸۱۰ مهر۲۲ مهر۵ آبان۱۸ آبان۱ آذر۱۰ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۱ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۲ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۳ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۴ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۵ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۶ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۷ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۸ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۹ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۰ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۱ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۲ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۳ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۴ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۵ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۶ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۷ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۸ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۹ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۳۰ مهر ۱۴۰۵: میانگین $۶۸۹٫۸۹۱ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۲ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۳ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۴ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۵ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۶ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۷ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۸ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۹ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۰ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۱ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۲ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۳ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۴ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۵ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۶ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۷ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۸ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۱۹ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۰ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۱ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۲ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۳ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۴ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۵ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۶ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۷ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۸ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۲۹ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۳۰ آبان ۱۴۰۵: میانگین $۶۸۹٫۸۹۱ آذر ۱۴۰۵: میانگین $۶۸۹٫۸۹

میانگین‌ها بر اساس همهٔ قیمت‌های پیشنهادی ثبت‌شده در هر روزِ UTC محاسبه می‌شوند.