AGIBOT G2 Wheeled Dual-Arm Humanoid Robot - RoboStore

AGIBOT G2 Wheeled Dual-Arm Humanoid Robot

OmniPicker 3 (Included)
$159,999.00
Add to cart

2070 TFLOPS

NVIDIA Jetson T5000

0.1 mm

Arm repeatability

1652 Wh

Dual battery capacity

AGIBOT G2 Specifications

Basic
  • Dimensions: 1225–1795 mm (H) × 640 mm (W) × 760 mm (L)
  • Weight: 185 kg
  • Active DOF: 26
  • Neck / Single Arm / Waist & Leg / Chassis DOF: 3 / 7 / 5 / 4
Perception
  • 3D LiDAR: 2
  • Stereo Camera: 1
  • Fisheye Camera: 3
  • Head RGB-D Camera: 1
  • Wrist RGB-D Camera: 2
Range of Motion
  • Head Yaw / Roll / Pitch: ±70° / ±20° / ±30°
  • Waist Yaw / Roll / Pitch: ±174° / ±24° / -104°–58°
  • Knee / Ankle: 0°–151° / -61°–0°
  • Shoulder Pitch / Roll / Yaw: ±178° / ±120° / ±178°
  • Elbow: -145°–60°
  • Wrist Yaw / Pitch / Roll: ±178° / ±90° / ±60°
Communication & Interaction
  • Communication: Wi-Fi, Bluetooth, 4G/5G (optional)
  • Mic array / Speaker / Face screen / Light strip: Equipped
Performance
  • Arm Rated Payload: 5 kg
  • Arm Repeatability: ±0.1 mm
  • Arm Joint Torque Sensor: Equipped
  • Chassis Speed: 1.5 m/s
  • Chassis Movement Modes: Ackermann steering, lateral movement, in-place rotation
Power
  • Batteries / Total Capacity: 2 / 1652 Wh
  • Typical / Standby Battery Life: ~4 h / ~25 h
  • Recharging Methods: Direct charging, battery swapping, autonomous recharging (dock required)
  • Charging Time: ≤2 h
  • Charging Voltage / Charger Output: 100–240 V / 54.75 V 15 A
Compute
  • Standard Edition: Not offered
  • High-Compute Edition: NVIDIA Jetson T5000 2070 TFLOPS (FP4)
Features & Protection
  • Data acquisition, teleoperation, mapping & nav, interaction, autonomous operation: Supported
  • Handheld terminal / OTA / Secondary dev: Available / Available / Supported
  • Whole-machine / Arm Protection: IP42 / IP50

What's Included:

  • Humanoid robot body

    Robot Body

  • AgiBot what's-included icon

    2× Battery

  • AgiBot what's-included icon

    Charger, 54.75 V 15 A

  • Wireless control terminal icon

    Wireless Control Terminal

Load video: A G2 working a production line and a machine cell

Built for a working line

G2 on a production line and at a machine cell, both arms working. A wheeled base and a 2.3 m arm span let it cover a station a fixed arm cannot.

Load video: Operators in teleoperation rigs driving G2 arms to capture demonstration data, then a G2 picking from bins

Set up to collect training data

Operators in teleoperation rigs driving the arms to capture demonstration data, and the platform running the task itself. What you do with that data is your pipeline, not a feature that ships switched on.

Load video: AgiBot key feature clip — G2 02 Reach and height

Reach and height, covered

A telescoping body works between 1225 mm and 1795 mm, so the same robot reaches a low bin and a high shelf without being re-rigged.

Load video: AgiBot key feature clip — G2 04 Safe human interaction

Made for our world

Obstacles placed deliberately in its path during testing, to check it stops and holds a stable posture. The wheeled base is what makes that predictable around human traffic.

Load video: AgiBot key feature clip — G2 05 Sees what is around it

LiDAR and 360° vision on board

A LiDAR, a head RGB-D and two wrist RGB-D cameras give the platform the sensing to map a space and see what is around it.

Load video: AgiBot key feature clip — G2 06 Runs a full shift

Runs a full shift

Two battery packs totalling 1652 Wh give around four hours of working runtime between charges.

Which AGIBOT Fits the Job?

X2 series

Half-scale humanoid

X2 series

1.31 m and under 40 kg — the entry point into humanoid work.

  • Research and development
  • Education and classroom demos
  • Events, reception and interaction
  • Tight spaces and tighter budgets
A3 series

Full-size humanoid

A3 series

1.74 m, 60 kg, 5 kg payload — built to work at human scale.

  • Front desks, help desks and guided service
  • Reaching human-height shelves and controls
  • Indoor and outdoor routes on one platform
  • Full perception and ±1 cm positioning on the Ultra

FAQs

What is included in the G2 package?

The overseas packaging solution: robot body, teleoperation VR headset and handles, one OmniPicker gripper and an air flight case.

Which compute does the US model use?

NVIDIA Jetson T5000 at 2070 TFLOPS. The HUIXI R1 standard edition is a domestic China configuration and is not offered outside it.

How does it get around?

A four-wheel chassis with Ackermann steering, lateral movement and in-place rotation at up to 1.5 m/s. It is an indoor platform.

Can it charge itself?

Yes, with the dock. It also supports direct charging and battery swapping, and charges in under two hours.

How It Works

Place Your Order

Order directly through our website or use the form below to connect with a product expert first. Delivery timelines depend on model availability, but we ship as quickly as possible — and we’ll keep you updated every step of the way.

Setup & Configuration

Every robot is different. Depending on your selected model and accessories, configuration can be plug-and-play or require a tailored setup. We offer optional demos, consultations, and ongoing support to ensure you’re up and running with confidence.

Get Up and GO

Once set up, your robot is ready to roll. Preloaded actions make it easy to get started, while manual controls and custom routines let you push the limits of what’s possible.

تاریخچهٔ قیمت

تاریخچهٔ میانگین قیمت

برای هر روز یک نقطهٔ داده؛ میانگین‌گیری بر اساس تاریخ مشاهده انجام شده است.

میانگین روزانهٔ قیمت

مبالغ به USD

$۱۵۹٬۹۹۹
نمودار تاریخچهٔ میانگین قیمت (به USD)نمودار خطیِ 3 مشاهده از ۲۹ آبان ۱۴۰۵ تا ۱ آذر ۱۴۰۵.$۱۵۹٬۹۹۹٫۰۳$۱۵۹٬۹۹۹٫۰۲$۱۵۹٬۹۹۹٫۰۱$۱۵۹٬۹۹۹$۱۵۹٬۹۹۸٫۹۹۲۹ آبان۳۰ آبان۱ آذر۲۹ آبان ۱۴۰۵: میانگین $۱۵۹٬۹۹۹۳۰ آبان ۱۴۰۵: میانگین $۱۵۹٬۹۹۹۱ آذر ۱۴۰۵: میانگین $۱۵۹٬۹۹۹

میانگین‌ها بر اساس همهٔ قیمت‌های پیشنهادی ثبت‌شده در هر روزِ UTC محاسبه می‌شوند.