Unitree IM6014 Motor for Humanoid Robots, Robot Dogs & Robotic Arms
Unitree IM6014 Motor for Humanoid Robots, Robot Dogs & Robotic Arms
Go to slide 1 Go to slide 2
Unitree IM6014 Motor for Humanoid Robots, Robot Dogs & Robotic Arms
Unitree IM6014 Motor for Humanoid Robots, Robot Dogs & Robotic Arms

Unitree IM6014 Motor for Humanoid Robots, Robot Dogs & Robotic Arms

Sale price$300.00

The Unitree IM6014 is a compact, high-torque robotic joint motor designed for robotic arms, humanoid robots, quadrupeds, and custom robotics systems. It combines precise motion control, high torque density, efficient cooling, and high-speed RS-485 communication.
Key Features
Dual-Port Daisy Chain for cleaner wiring in multi-joint systems
Dual Absolute Encoders for accurate positioning and motion control
High Torque Density with approximately 1.5× higher torque density than conventional designs
Enhanced Cooling for sustained high-load operation
High-Quality Bearings for durability under repeated loads and impacts
High-Speed RS-485 Communication for responsive robotic control

Description
Performance Characteristics
Model N6014B-12.6
Weight 535 g
Dimensions Ø65 × 60 mm
Maximum No-Load Speed 54.2 rad/s @ 60 V
Input Voltage 24–75 V
Gear Ratio 3:38 (approx. 12.66:1)
Maximum Line Current 40 A
Maximum Torque
Opposite direction of rotational speed
34.4 Nm
Maximum Torque
Same direction as rotational speed
31.7 Nm
Temperature
Minimum Operating Temperature -20°C
Driver Overheat Protection Driver board shuts down and reports an overheat error above 90°C
Winding Overheat Protection Winding shuts down and reports an overheat error above 130°C
Control & Communication
Baud Rate 6,000,000 bps / 4,000,000 bps
Control Algorithm Hybrid Control
Protocol High-Speed RS-485 Communication
8-bit, 1 stop bit, no parity
Physical Connection RS-485 Multidrop Bus
Motor ID 0–14
Encoder Resolution 15-bit
Position Sensor Rotor-side and output-side dual absolute encoders
Construction
Gear Material Metal
Shell Material Aluminum alloy + high-strength engineering plastic
Commands & Feedback
Command Signals Motor ID, operating mode, timeout protection, feedforward torque, target velocity, target position, position stiffness, velocity stiffness
Motor Feedback Torque, angle, angular velocity, temperature, voltage, error status, fault status
Motor Control Torque, angle, angular velocity, feedforward torque, position stiffness, velocity stiffness
Warranty 3 months

价格历史

平均价格走势

每天显示一个数据点,按观测日期计算平均值。

每日平均价格

金额单位:USD

$300
以 USD 计价的平均价格历史图表从 2026年10月2日 到 2026年11月22日 的 61 条观测数据折线图。$300.03$300.02$300.01$300$299.9910月2日10月14日10月27日11月9日11月22日2026年10月2日:平均价 $3002026年10月3日:平均价 $3002026年10月4日:平均价 $3002026年10月5日:平均价 $3002026年10月6日:平均价 $3002026年10月7日:平均价 $3002026年10月8日:平均价 $3002026年10月9日:平均价 $3002026年10月10日:平均价 $3002026年10月11日:平均价 $3002026年10月12日:平均价 $3002026年10月13日:平均价 $3002026年10月14日:平均价 $3002026年10月15日:平均价 $3002026年10月16日:平均价 $3002026年10月17日:平均价 $3002026年10月18日:平均价 $3002026年10月19日:平均价 $3002026年10月20日:平均价 $3002026年10月21日:平均价 $3002026年10月22日:平均价 $3002026年10月23日:平均价 $3002026年10月24日:平均价 $3002026年10月25日:平均价 $3002026年10月26日:平均价 $3002026年10月27日:平均价 $3002026年10月28日:平均价 $3002026年10月29日:平均价 $3002026年10月30日:平均价 $3002026年10月31日:平均价 $3002026年11月1日:平均价 $3002026年11月2日:平均价 $3002026年11月3日:平均价 $3002026年11月4日:平均价 $3002026年11月5日:平均价 $3002026年11月6日:平均价 $3002026年11月7日:平均价 $3002026年11月8日:平均价 $3002026年11月9日:平均价 $3002026年11月10日:平均价 $3002026年11月11日:平均价 $3002026年11月12日:平均价 $3002026年11月13日:平均价 $3002026年11月14日:平均价 $3002026年11月15日:平均价 $3002026年11月16日:平均价 $3002026年11月17日:平均价 $3002026年11月18日:平均价 $3002026年11月19日:平均价 $3002026年11月20日:平均价 $3002026年11月21日:平均价 $3002026年11月22日:平均价 $300

每天的平均价格根据该 UTC 日期记录的所有报价计算。