Description

The Unitree H2 Basic is Unitree's full-size H2 humanoid in its base configuration: the 182 cm, 31-joint biped without hands, ready for your own end effectors and software. Unitree's published H2 specifications apply; the exact configuration and the warranty term are confirmed with your quotation.

Standing 182 cm and weighing about 70 kg, the H2 carries 31 degrees of freedom — 6 in each leg, 7 in each arm, 3 in the waist and 2 in the head — on low-inertia, high-speed internal-rotor motors and industrial-grade crossed roller bearings. The arm joints deliver up to 120 N·m and the leg joints 360 N·m, for an arm payload of about 7 kg rated and 15 kg peak. The body is aircraft-grade aluminium, titanium alloy and high-strength engineering plastics, with a bionic head and facial features.

A wide-field binocular camera, an array microphone and a high-power speaker give it vision and voice interaction; Wi-Fi 6 and Bluetooth 5.2 connect it. A quick-release 15 Ah smart battery (0.972 kWh) runs it for about 3 hours, and the back panel carries six USB-C ports, a GMSL video input, two gigabit Ethernet ports, four power outputs with RS-485 or CAN and two dexterous-hand connectors. Unitree's motion-control algorithms replicate dynamic movement precisely and continue to evolve through OTA updates.

Unitree positions the H2 for research and algorithm development, education and training, shows and exhibitions and the exploration of industrial scenarios; its own films show it dancing, boxing and walking a fashion runway. It is a research and development platform: Unitree advises keeping a safe distance from the robot in operation, using it at 0–40 °C on firm, dry ground, and understanding the platform's limitations before buying.

Need secondary development, a second onboard computer, dexterous hands or an NVIDIA Jetson Thor module? The Unitree H2 EDU adds them. Unitree also builds the H2 upper body on a fixed mount (H2-A), on a lift column with a fixed or mobile base (H2-D) and as the H2 Plus with Jetson Thor onboard.

Features

Full-size, human proportions 1820 mm standing, about 70 kg with the battery; 1045 mm legs and 690 mm arms in aircraft-grade aluminium, titanium alloy and engineering plastics, with a bionic head and facial features.
31 degrees of freedom 6 in each leg, 7 in each arm, 3 in the waist and 2 in the head, driven by 31 low-inertia PMSM motors on industrial-grade crossed roller bearings.
Joints built for dynamics 120 N·m at the arm joints and 360 N·m at the leg joints; an arm payload of about 7 kg rated and 15 kg peak. Unitree's motion-control algorithms replicate dynamic movement and keep evolving through OTA updates.
Sees, hears and speaks A wide-field binocular camera (2064 × 1552 px, 156° × 116°) behind the bionic face, an array microphone and a high-power speaker for voice interaction, Wi-Fi 6 and Bluetooth 5.2.
Quick-release smart battery 15 Ah, 0.972 kWh, about 3 hours per charge, with Unitree's battery management system; the charger refills it in about 2 h 40 min.
Open back panel Six USB-C ports, a GMSL video input, two gigabit Ethernet ports, four power outputs with RS-485 or CAN and two dexterous-hand connectors, plus M6 mounting holes.
Complete in the box Remote controller, battery, charger, protective stand, packaging case, calibration blocks and fixtures, lifting lanyard, foot airbags and tools, as listed in Unitree's H2 user manual.

Specs

Model	H2 Basic
Brand	Unitree Robotics
Robot type	Full-size bipedal humanoid
Height × width × depth, standing	1820 × 456 × 218 mm
Weight, with battery	About 70 kg
Degrees of freedom	31 (31 joint motors)
Per leg · per arm · waist · head	6 · 7 · 3 · 2
Arm joints	Shoulder 3, elbow 2, wrist 2
Leg joints	Hip 3, knee 1, ankle 2
Bionic head with facial features	Yes
Joint output bearing	Industrial-grade crossed roller bearings
Joint motor	Low-inertia, high-speed internal-rotor PMSM
Maximum arm joint torque	120 N·m
Maximum leg joint torque	360 N·m
Arm payload	About 7 kg rated, about 15 kg peak
Calf + thigh length	1045 mm
Forearm + upper arm length	690 mm
Materials	Aircraft-grade aluminium, titanium alloy, high-strength engineering plastics
Cooling	Local air cooling
Battery	Quick-release smart battery, 15 Ah, 0.972 kWh; 64.8 V rated, 75.6 V maximum
Battery life	About 3 hours
Charger	100–240 V input; 76.5 V, 2–6.6 A output (about 499 W); full charge in about 2 h 40 min
Remote control	R3 handheld joystick remote: data-transmission module and Bluetooth, over 100 m in an open environment, about 5 h per charge, emergency stop
Vision	Humanoid binocular camera: two global-shutter RGB sensors, 2064 × 1552 px, 156° × 116° field of view, 60 mm baseline
Voice	Array microphone and high-power speaker
Connectivity	Wi-Fi 6, Bluetooth 5.2; two gigabit Ethernet ports
Back panel	Six USB-C ports, one GMSL video input, two gigabit Ethernet ports, four GXT30 power outputs with RS-485 or CAN (12 V, 24 V, direct battery; 500 W in total), two dexterous-hand connectors
Mounting	M6 threaded holes on the back, 176 × 150 mm and 100 mm spacing
Software updates	Intelligent OTA
Operating conditions	0–40 °C, firm dry ground; not waterproof or dustproof
Configuration	The H2 platform in its base configuration, no hands fitted; computer, options and warranty term confirmed with your quotation
Dexterous hands	Not fitted; hand interfaces on the back panel
In the box	Unitree's H2 accessory list — Remote controller, battery, battery charger, protective stand, lying-posture packaging case, waist calibration blocks A and B, hip calibration fixtures A and B, ankle calibration fixtures (2), IMU calibration fixture, specialised lanyard, front and rear foot airbags (4 + 4), M4 × 20 screws (4), M4 hex wrench, level, XT30-M connectors (6), power connectors (4); confirmed with your quotation

Industries

Research
Education
Entertainment
Industrial

Product Brochure

Unitree H2 Basic Humanoid Robot – Product Brochure

The Robotix Market brochure with every capability and the full technical specification — to save, print or forward.

PDF · A4 · Robotix Market

Download Brochure (PDF)

Frequently Asked Questions

How much does the Unitree H2 Basic cost?

The Unitree H2 Basic is priced at $39,900 in your market. For volume or project orders, contact us for a business quote.

What is included with the Unitree H2 Basic?

Unitree's H2 user manual lists: remote controller, battery, battery charger, protective stand, lying-posture packaging case, waist calibration blocks A and B, hip calibration fixtures A and B, ankle calibration fixtures (2), IMU calibration fixture, specialised lanyard, front and rear foot airbags (4 + 4), M4 × 20 screws (4), M4 hex wrench, level, XT30-M connectors (6), power connectors (4).

We confirm the full packing list of the Basic configuration with your quotation.

What is the difference between the H2 and the H2 Basic?

Both are the H2 platform with Unitree's published specifications. The H2 Basic is the base configuration without hands; its computer, options and warranty term are confirmed with your quotation, so you can specify exactly what you need.

What is the difference between the H2 and the H2 EDU?

The body is identical. The Unitree H2 EDU adds an Intel Core i7 development computer, secondary development with Unitree's SDK, dexterous-hand options and an optional high-power AI module such as NVIDIA Jetson Thor, and carries a 12-month warranty instead of 8. The standard H2 runs on its Intel Core i5 motion computer and does not offer secondary development.

Does the Unitree H2 Basic come with hands?

No. The Unitree H2 Basic ships without hands; the back panel carries two dexterous-hand connectors. Unitree offers dexterous hands with the Unitree H2 EDU, and we can quote hand packages on request.

How long does the battery last and how is it charged?

The quick-release 15 Ah smart battery (0.972 kWh) gives about 3 hours of use. The charger takes 100–240 V and refills it in about 2 hours 40 minutes; the first charge takes the battery out of shipping mode.

Where can the H2 be used?

Unitree specifies operation at 0–40 °C on firm, dry ground; the H2 is not waterproof or dustproof. Keep a sufficient safe distance between the robot and people, and use it as the civilian robot it is, without modifications or hazardous use.

Do you ship worldwide?

Yes. Robotix Market ships worldwide; delivery, import duties and the delivery estimate to your address are confirmed with your quotation.

Unitree Robotics

Unitree H2 Basic Humanoid Robot

Regular price: $39,900.00
Sale price

Unit price

The H2 platform in its base configuration: Unitree's 182 cm, 31-DoF humanoid without hands — 360 N·m leg joints, binocular camera, 3-hour smart battery; configuration and warranty term confirmed at quotation.

In Stock

OriginChina

Warranty12 months

SKUUnitree-H2-BASIC