Prețul mediu zilnic
Sume în USD










Key Features
Degrees of Freedom
Weight
Payload
Repeat Accuracy
Open / Close Time
0.1 N Force Resolution
Dimensions
SDK Python & C++
Key Features
Degrees of Freedom
Weight
Payload
Repeat Accuracy
Open / Close Time
0.1 N Force Resolution
Dimensions
SDK Python & C++
The AGILINK OmniHand 3 is AGILINK’s general-purpose dexterous hand for mainstream humanoid robots — 16 degrees of freedom, 3 kg payload, 570 g, and one-dimensional tactile sensing resolving to 0.1 N. Order a single left or right hand, or the matched pair.
Compatible with:
Fits every AGIBOT humanoid RoboStore carries.
The AGILINK OmniHand 3 is the hand AGILINK builds for mainstream humanoid robots. It is the middle of the range and, for most manipulation work, the right answer: sixteen degrees of freedom, 3 kg of payload, one-dimensional tactile sensing, and a price that lets you buy pairs rather than agonise over one.
Ten active joints drive six passive ones across 189 × 85 × 39 mm and 570 g. It opens and closes in 0.5 seconds and repeats to ±0.3 mm. Tactile coverage is 1D sensing at 0.1 N force resolution.
It is supported under ROS 2 with a Python and C++ SDK, works with Dex-UMI data collection, and mounts to mainstream humanoids and robot arms as well as the AGIBOT range. Choose a single left or right hand, or order the matched pair.
Sixteen DOF Without Sixteen Motors. Ten active joints drive six passive ones. The hand wraps and conforms around real objects, but you are tuning ten control channels, not sixteen.
Tactile, Not Guesswork. 1D tactile sensing at 0.1 N force resolution, so the hand reports contact instead of inferring it. That is what makes in-hand manipulation and contact-rich policy learning workable.
3 kg of Real Payload. Triple the Lite-S, in a hand that still weighs 570 g. It covers the great majority of logistics, service, laboratory and household manipulation tasks.
Specified for Mainstream Humanoids. AGILINK positions this as the full-scale hand. It mounts to mainstream humanoid robots and arms without the adapter questions a half-scale hand raises.
Open Where It Counts. ROS 2, a Python and C++ SDK, and Dex-UMI compatibility for data collection workflows.
AGILINK is AGIBOT’s dexterous manipulation arm. It reports 20,000+ end effectors shipped, the No.1 global market share in dexterous hands for Q1 2026, and 50,000+ hours of real-world manipulation data behind its control stack. Every hand and gripper in the AGILINK range ships with a Python and C++ SDK and runs under ROS 2.
The OmniHand 3 Lite-S drops to 350 g and 11 DOF for half-scale platforms. The OmniHand 3 Ultra (Tactile) steps up to 21 active DOF with full-hand tactile sensing and an 8 kg lifting capacity. For pure pick-and-place, the OmniPicker 3 gripper gives you 140 N and 5 kg for a small fraction of the price.
Specifications subject to change. All figures reflect AGIBOT manufacturer data current as of November 2026. For the most current information, custom configurations or volume pricing, contact .




AGILINK OmniHand 3 Dexterous Hand (with Tactile)
Active degrees of freedom
Weight
Payload
It is sold as a single hand. Choose left or right. Order both for a pair.
Every AGIBOT X2, A3 and G2 variant, plus mainstream humanoids and arms. Confirm the wrist flange, adapter and firmware version with Robo Inc. at order time.
One-dimensional tactile sensing, resolving to 0.1 N. AGILINK does not publish a sensor count for this hand — if you need a quantified array, that is the OmniHand 3 Ultra, at 585 tactile points plus a 320 × 240 fingertip camera.
ROS 2 and Dex-UMI, with Python and C++ SDKs, over CANFD or RS485.
Half a second to open or close, repeating to ±0.3 mm.
Place Your Order
Order directly through our website or use the form below to connect with a product expert first. Delivery timelines depend on model availability, but we ship as quickly as possible — and we’ll keep you updated every step of the way.
Setup & Configuration
Every robot is different. Depending on your selected model and accessories, configuration can be plug-and-play or require a tailored setup. We offer optional demos, consultations, and ongoing support to ensure you’re up and running with confidence.
Get Up and GO
Once set up, your robot is ready to roll. Preloaded actions make it easy to get started, while manual controls and custom routines let you push the limits of what’s possible.
Istoricul prețurilor
Un punct de date pentru fiecare zi, calculat ca medie după data observației.
Sume în USD
Mediile sunt calculate pentru fiecare zi UTC, pe baza tuturor prețurilor ofertelor înregistrate.

Agibot · Paris, FR
$6.999

Agibot · Shanghai, CN
de la $6.599

Agibot · Paris, FR
$5.999

Agibot · Paris, FR
$9.550

Agibot · Los Angeles, US
de la $1.009

Agibot · Los Angeles, US
de la $23.999

Agibot · Paris, FR
de la $899

Agibot · Paris, FR
$23.999

Agibot · Paris, FR
$11.595

Agibot · Shanghai, CN
de la $699

Agibot · Shanghai, CN
de la $999

Agibot · Eindhoven, NL
de la 19.900 zł
🍪 Preferințe pentru cookie-uri
Folosim cookie-uri pentru a măsura performanța. Politica de confidențialitate