Pack of 6 Dynamixel MX-106T servomotors

Pack of 6 Dynamixel MX-106T servomotors

Pack of 6 Dynamixel MX-106T servomotors
Robotis | A-000000-02762
€3,292.20 VAT incl. €2,743.52 VAT excl.

Including €0.10 for ecotax

The most powerful servo in the MX series reinvents itself in a pack of 6 Dynamixel MX-106T servo motors supporting TTL communication. Let’s go for more ambitious projects!

Quantity
Delivery within 4 weeks

Create a cart and turn it into a quote instantly!
Payment methods (see T&C)
Debit card
PayPal
Payment by invoice
Wire transfer

Dynamixel MX-106T servos: stepping up a notch altogether

With a higher torque and reduction ratio in an aluminium case that’s more resistant to overheating, a better control of speed and position, and many compatible mechanical parts for easier assembly, the Dynamixel MX-106T sure has a lot to offer. Available in a pack of 6 servos, all with a TTL serial connection, the MX106-T will also impress you with its incredible transmission rate!

Warning ! This box contains only 6 actuators without the traditional accessories: screws, frames and horns. Only bare actuators are supplied in the box.

Pack of 6 Robotis 902-0071-000 servos: get ready for your own humanoid robot

Always wanted to create your own humanoid robot? Or do you simply need a couple of servos at hand for your Poppy or DARwin-OP? The MX-series servos were made for you! With the MX-106T Dynamixel servomotor, you can create powerful articulated arms with precise robotised hands, and walk into the future!

Technical specifications of the MX-106T servos

  • Weight: 153g
  • Dimensions: 40.2 × 65.1 × 46 mm
  • Reduction ratio: 225: 1
  • Stall torque (N.m): 8 @ 10V; 8.4 @ 12V; 10 @ 14.8V
  • Stall current (A): 4.8 @ 10V; 5.2 @ 12V; 6.3 @ 14.8V
  • No-load speed (RPM ): 41 @ 10V; 45 @ 12V; 55 @ 14.8V
  • Maxon motor
  • Min. operating angle: ~0.088° x 4,096
  • Operating range:
  • Actuator mode: 360°
  • Follow-up mode:
  • Operating voltage: 10 to 14.8V (recommended: 12V)
  • Operating temperature: -5°C to 80°C
  • Control signal: digital packets
  • Communication protocol: RS-485 asynchronous serial communication (8 bit, 1 stop, no parity)
  • Connection: TTL multi-drop bus (daisy chain connector)
  • 254 IDs (0–253)
  • Com speed: 8,000 bps ~ 4.5 Mbps
  • Feedback: position, temperature, load, input voltage, etc.
  • Engineering plastic body
  • Metal gears
  • Position sensor: AMS contact-less absolute encoder
  • Default position: ID#1 – 57,600 bps

Resources for the pack of 6 MX-106T servos

Do not miss any technical detail with this list of useful links for your MX-106T servos:

    My Dynamixel servomotor is not detected, what can I do about it ?

    Check that your Dynamixel servomotor is correctly configured. Do not hesitate to re-flash it with the ROBOTIS Software Roboplus. After re-flash remember to re-configure it. If the issue is not solved, for an advanced support.


    My motor works but it seems like there is an offset. Why ?

    The motor is probably not well mounted. Check that you correctly mounted the horns by respecting the mark.


    My Dynamixel servomotor seems blocked. I can't turn it even when it is not alimented.

    There is probably a mechanical issue with the Dynamixel servomotor. You can directly to get more advance support.


    My Dynamixel servomotor is not working properly.

    Check your power supply and the system cabling (try with a different servomotor). You can also reset the servo. If nothing works, the best solution is to go through the Dynamixel servomotor checklist!


    What is the difference between Protocol 1.0 and Protocol 2.0?

    The 1.0 protocol is dedicated to the Dynamixel AX and MX series. Protocol 2.0 is for the X and Dynamixel Pro series. Protocol 2.0 control tables include PID controls which allow for more precise adjustment of the servo motor movements. Protocol 2.0 can be updated on MX series servo motors. You can refer to the protocol 1.0 and protocol 2.0 pages for more informations.


Historia cen

Historia średnich cen

Jeden punkt danych na dzień, uśredniony według daty pomiaru.

Średnia cena dzienna

Kwoty w USD

$3613,83
Wykres historii średnich cen w USDWykres liniowy przedstawiający 61 pomiarów od 2 paź 2026 do 22 lis 2026.$3613,86$3613,85$3613,84$3613,83$3613,822 paź14 paź27 paź9 lis22 lis2 paź 2026: średnio $3613,833 paź 2026: średnio $3613,834 paź 2026: średnio $3613,835 paź 2026: średnio $3613,836 paź 2026: średnio $3613,837 paź 2026: średnio $3613,838 paź 2026: średnio $3613,839 paź 2026: średnio $3613,8310 paź 2026: średnio $3613,8311 paź 2026: średnio $3613,8312 paź 2026: średnio $3613,8313 paź 2026: średnio $3613,8314 paź 2026: średnio $3613,8315 paź 2026: średnio $3613,8316 paź 2026: średnio $3613,8317 paź 2026: średnio $3613,8318 paź 2026: średnio $3613,8319 paź 2026: średnio $3613,8320 paź 2026: średnio $3613,8321 paź 2026: średnio $3613,8322 paź 2026: średnio $3613,8323 paź 2026: średnio $3613,8324 paź 2026: średnio $3613,8325 paź 2026: średnio $3613,8326 paź 2026: średnio $3613,8327 paź 2026: średnio $3613,8328 paź 2026: średnio $3613,8329 paź 2026: średnio $3613,8330 paź 2026: średnio $3613,8331 paź 2026: średnio $3613,831 lis 2026: średnio $3613,832 lis 2026: średnio $3613,833 lis 2026: średnio $3613,834 lis 2026: średnio $3613,835 lis 2026: średnio $3613,836 lis 2026: średnio $3613,837 lis 2026: średnio $3613,838 lis 2026: średnio $3613,839 lis 2026: średnio $3613,8310 lis 2026: średnio $3613,8311 lis 2026: średnio $3613,8312 lis 2026: średnio $3613,8313 lis 2026: średnio $3613,8314 lis 2026: średnio $3613,8315 lis 2026: średnio $3613,8316 lis 2026: średnio $3613,8317 lis 2026: średnio $3613,8318 lis 2026: średnio $3613,8319 lis 2026: średnio $3613,8320 lis 2026: średnio $3613,8321 lis 2026: średnio $3613,8322 lis 2026: średnio $3613,83

Średnie obliczane są dla każdej doby UTC na podstawie wszystkich zarejestrowanych cen ofert.