new RoboSavvy robot — 画像 1

SparkFun Ardumoto Shield Kit

RoboSavvy

£27.35

状態

New

Robots are fun, and Arduinos are easy. So wouldn't it be nice if there were a kit that included everything you need to get your Arduino device set up to control a simple two-motor-circuit buddy? The SparkFun Ardumoto Shield Kit is perfect for any robot enthusiast and includes an Ardumoto Shield, as well as pairs of tires, motors, connectors and wires. And, of course, it’s all stuffed in a classic SparkFun red box (which may come in handy as a robot chassis). The Ardumoto Shield is an easy-to-use dual-motor controller for Arduino. Combined with an Arduino, the Ardumoto makes a fantastic controller platform for RC vehicles or even small autonomous robots. At the heart of the Ardumoto --- the big, black chip right in the middle --- is an L298, one of our favorite dual-channel motor drivers around, capable of driving up to 2A per channel. The board takes its power from the same Vin line as the Arduino board and includes blue and yellow LEDs to indicate active direction. All driver lines are diode protected from back EMF. Note: The motors included with this kit are not compatible with the Wheel Encoder kit. Sorry for the inconvenience. Get Started with the SparkFun Ardumoto Kit Guide Kit Includes: 1x SparkFun Ardumoto Shield 2x Hobby Gearmotor -- 65 RPM 2x Wheel -- 65mm (Rubber Tire) 1x Arduino Stackable Header Kit 3x Screw Terminals 3.5mm Pitch (2-Pin) 1x 9V to Barrel Jack Adapter 2x Black Wire -- 5" Length (22AWG Solid Core) 2x Red Wire -- 5" Length (22AWG Solid Core) Documents: Schematic Eagle Files Hookup Guide Datasheet (L298) GitHub

Robots are fun, and Arduinos are easy. So wouldn't it be nice if there were a kit that included everything you need to get your Arduino device set up to control a simple two-motor-circuit buddy? The SparkFun Ardumoto Shield Kit is perfect for any robot enthusiast and includes an Ardumoto Shield, as well as pairs of tires, motors, connectors and wires. And, of course, it’s all stuffed in a classic SparkFun red box (which may come in handy as a robot chassis). The Ardumoto Shield is an easy-to-use dual-motor controller for Arduino. Combined with an Arduino, the Ardumoto makes a fantastic controller platform for RC vehicles or even small autonomous robots. At the heart of the Ardumoto --- the big, black chip right in the middle --- is an L298, one of our favorite dual-channel motor drivers around, capable of driving up to 2A per channel. The board takes its power from the same Vin line as the Arduino board and includes blue and yellow LEDs to indicate active direction. All driver lines are diode protected from back EMF. Note: The motors included with this kit are not compatible with the Wheel Encoder kit. Sorry for the inconvenience. Get Started with the SparkFun Ardumoto Kit Guide Kit Includes: 1x SparkFun Ardumoto Shield 2x Hobby Gearmotor -- 65 RPM 2x Wheel -- 65mm (Rubber Tire) 1x Arduino Stackable Header Kit 3x Screw Terminals 3.5mm Pitch (2-Pin) 1x 9V to Barrel Jack Adapter 2x Black Wire -- 5" Length (22AWG Solid Core) 2x Red Wire -- 5" Length (22AWG Solid Core) Documents: Schematic Eagle Files Hookup Guide Datasheet (L298) GitHub

価格の推移

平均価格の推移

観測日ごとに平均した、1日あたり1つのデータポイント。

日ごとの平均価格

USDでの金額

$35.80
USDで表示した平均価格の推移グラフ2026/10/12から2026/10/12までの1件の観測値を示す折れ線グラフ。$35.83$35.82$35.81$35.80$35.7910月12日2026/10/12:平均$35.80

記録されたすべての販売価格を対象に、UTCの日ごとの平均を算出しています。