ODROID-H3+ Development Board | Generation Robots

ODROID-H3+ Development Board | Generation Robots

ODROID-H3+ Development Board | Generation Robots

ODROID-H3+ Development Board | Generation Robots

ODROID-H3+ Development Board | Generation Robots

ODROID-H3+ Development Board | Generation Robots

ODROID-H3+ Development Board | Generation Robots

ODROID-H3+ Development Board

ODROID-H3+ Development Board | Generation Robots

Hardkernel | A-000000-07125

€270.00 VAT incl. €225.00 VAT excl.

Available with 64GB, the ODROID-H3+ development board stands out for its use of a Jasper Lake chip, Pentium N6005.

Quantity

1 Available

Get it in 24/48h! (see T&C)

Ask for a quote

Create a cart and turn it into a quote instantly!

Payment methods (see T&C)

Payment by invoice

Odroid-H3+: a Pentium N6005 development board

The ODROID-H3+ retains the same physical design and comparable energy efficiency as its predecessor, the ODROID-H2+, but boasts increased power and higher performance.

This new x86-64-bit single-board computer is characterised by vast storage capacity, sophisticated I/O connection options and broad compatibility:

The Intel® Quad-Core Jasper Lake N6005 processor has a base frequency of 2 GHz and a boost frequency of 3.3 GHz, with 1.5 MB of L2 cache and 4 MB of L3 cache, manufactured using a 10 nm process
Up to 64 GB dual-channel DDR4 PC4-23400 memory (2933MT/s)
Two SO-DIMM slots, up to 32 GB per slot
PCIe 3.0 x 4 channels for M.2 NVMe storage
2 x 2.5 Gbps Ethernet ports
2 SATA 3.0 ports
SSE4.2 accelerator (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES)
Intel UHD Graphics with 32 execution units and turbo at 900 MHz
HDMI 2.0 and DP 1.2 multiple video outputs
Configurable Unlimited Performance mode enabling the CPU to operate in sustained turbo boost mode
RTC / BIOS battery backup included

In short, the Odroid-H3+ is a versatile card par excellence. It's perfect for setting up a discreet, compact workstation, but can also be integrated into furniture, used in kiosks, as video projectors or transformed into multimedia systems for vehicles. Its power is sufficient to handle a variety of tasks, meeting the expectations of most users.

Odroid-H3+ technical specifications

Processor:

Intel Celeron N6005 (10nm, Quad-Core, TDP 10W)
H3+(N6005): up to 3.3Ghz
4MB L2 cache
Intel UHD graphics (24/32 EU up to 900MHz)

Memory:

2 SO-DIMM DDR4 1.2V slots
Dual channel, up to 2933 MT/s (DDR4-PC23400)
Maximum memory capacity 64GB
DDR3/DDR5 are not supported

Storage:

1 eMMC connector (bootable and selectable in the BIOS)
Various eMMC modules can be purchased from Hardkernel
2 SATA3 6Gbps ports (SATA Port-Multiplier is NOT compatible)
1 M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards)
SSD M.2 SATA is not supported

Network:

2 GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)
Realtek RTL8125B
Supports wake-up by network
LED indicators (Green: Link, Amber: Traffic)

Video:

1 DisplayPort 1.2 (up to 4K@60Hz)
1 HDMI 2.0 (up to 4K@60Hz)
Dual simultaneous display support

Audio:

1 audio output (3.5 mm jack)
1 audio input (3.5mm jack)
1 SPDIF output (ALC1200, HDA codec)
HDMI & DP also have an audio output.

External I/O:

2 USB 3.0 host ports
2 USB 2.0 host ports
1 peripheral expansion header (24-pin, 2.54mm pitch)
1 x DC 5V, 1 x DC 3.3V, 5 x GND
1 x UART (TXD/RXD/RTS/CTS)
2 x I2C (SCL/SDA)
1 x external power button
HDMI CEC via add-on card, 5VA+
3 x USB 2.0
All 3.3V I/O signal levels

Other features:

Passive heat sink
BIOS backup battery
Maintains system time and BIOS settings
Power button
Reset button
System LED indicators:
Red (PWR) - Steady light when DC power is supplied
Blue (left, SLEEP) - goes out only when the system enters standby mode
Blue (right, PMIC) - lights up only when the main power rails are operating
Amber (SATA) - Flashes during SATA data transfers
Green (NVMe) - Flashes during NVMe data transfers
Connector for active cooling fan (12V 4-pin, PWM input + TACHO output)
Active cooling fan is optional
Connector (4-pin, 2.54mm pitch)

Power supply:

DC socket: outside diameter (earth) 5.5mm, inside diameter (positive) 2.1mm
DC 14V ~ 20V (up to 60W)
DC 15V/4A power adapter recommended if you're not using two 3.5" hard drives
DC 19V/7A power adapter recommended if using two 3.5" hard drives together

Energy consumption:

IDLE: ≃1..9W
CPU stress: ≃15W
CPU+GPU stress: ≃18W<
Switch-off: ≃0.25W<
Standby: ≃0.6W
Dimensions: 110mm x 110mm x 47mm

Odroid-H3+ resources

تاریخچهٔ قیمت

تاریخچهٔ میانگین قیمت

برای هر روز یک نقطهٔ داده؛ میانگین‌گیری بر اساس تاریخ مشاهده انجام شده است.

میانگین روزانهٔ قیمت

مبالغ به USD

$۳۰۲٫۵۳

میانگین‌ها بر اساس همهٔ قیمت‌های پیشنهادی ثبت‌شده در هر روزِ UTC محاسبه می‌شوند.

آگهی‌های مرتبط

نو Unitree robot — تصویر 1

Unitree Go2 Roboterhund Fernbedienung (Air & Pro)

Unitree

۳۰۰ €

نو Unitree robot — تصویر 1

Unitree Robotics Go2 Protective Bracket

Unitree

$۴۹۵

نو Unitree Z1 robot — تصویر 1

Unitree Z1 - Robotic Arm

Unitree

۱۵٬۳۴۹ €

نو Unitree Z1 robot — تصویر 1

Unitree Z1 Pro Robot Arm (Exhibition Demo Unit)

Unitree

$۱۳٬۹۰۰$۱۱٬۸۱۵تخفیف 15٪

نو Unitree D1 robot — تصویر 1

Unitree Go2 Servo Robotic Arm D1

Unitree

$۴٬۸۰۰

نو Unitree Z1 robot — تصویر 1

Unitree Z1 Air Robot Arm

Unitree

$۱۱٬۹۰۰

نو Unitree Z1 robot — تصویر 1

Unitree Z1 Pro Robot Arm (Demo Unit) with NEW Z1 Gripper

Unitree

$۱۶٬۰۵۰$۱۳٬۸۵۸تخفیف 14٪

نو Unitree Z1 robot — تصویر 1

Unitree Z1 Pro Robot Arm with Z1 Gripper

Unitree

$۱۶٬۰۵۰

نو Unitree robot — تصویر 1

The Baxter Research Robot from Rodney Brooks and Rethink Robotics

Unitree

۱۰٬۰۰۰ €

نو Unitree robot — تصویر 1

Poppy Torso Robot Raspberry version (with 3D printed parts)

Unitree

۶٬۴۲۷٫۲۰ €

نو Unitree robot — تصویر 1

Poppy Torso Robot Raspberry Pi version (without 3D printed parts)

Unitree

۴٬۸۶۷٫۲۰ €

نو Unitree robot — تصویر 1

Hunter SE Mobile Robot (UGV)

Unitree

۸٬۱۱۲ €