The BrainCo Revo 2 Basic is the base build of BrainCo's five-finger bionic dexterous robotic hand, supplied here in the version made for the Unitree H2 humanoid, one hand per unit, left or right. It weighs 383 g, measures 160 mm from palm base to middle fingertip and opens 100 mm between thumb and index finger. Its 11 degrees of freedom come from six motors, two in the thumb and one in each finger, with five more joints following passively.
It is the hand for H2 owners who want human-like grasping without paying for touch sensing: tools, cups, boxes and irregular parts picked up during teleoperation, imitation-learning data collection or demonstrations, with perception coming from the robot's own head cameras. The grip reaches at least 50 N, the pinch at least 15 N and the payload at least 20 kg, with 0.1° repeat control precision and a full flex or extension in 0.65 s or less.
Control runs over RS-485 (Modbus-RTU) or CAN FD on a 12–28 V supply. Position, velocity and current control come with cascaded and compliance modes, and the hand protects itself against overcurrent, stalls, overheating and collisions. BrainCo's Python and C/C++ SDKs run on Linux, Windows and ROS, the firmware updates over the air, and mounting and cabling for your H2 are confirmed with the quotation.
The Revo 2 Tactile for the H2 keeps the same mechanism and adds BrainCo's fingertip tactile module, EtherCAT, a 12–64 V input and an RGB camera. For robots other than the H2, the Revo 2 Basic left hand (XRL) and its right-hand twin are sold on their own, and our full range of dexterous robotic hands covers other makes and models.
Key Capabilities
-
11 degrees of freedom, six motors: Six motors drive thumb flexion, thumb abduction and one flexion joint in each finger, and five more joints follow passively, which keeps the hand at 383 g.
-
50 N grip, 20 kg payload: The five-finger grip reaches at least 50 N and the pinch at least 15 N, and the hand carries at least 20 kg.
-
0.1° repeat control precision: Each finger flexes or extends fully in 0.65 s or less, at no more than 50 dB measured at 50 cm.
-
RS-485 and CAN FD: The Basic connects over RS-485 (Modbus-RTU) or CAN FD on 12–28 V and draws 65 mA at rest at 24 V.
-
Compliance control and protection: Position, velocity and current control come with cascaded and compliance modes, plus current, stall, over-temperature and collision protection.
-
Python, C/C++ and ROS: BrainCo's SDKs run on Linux, Windows and ROS, and the firmware updates over the air.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.