Description

The Unitree H2 EDU SMART H is the H2 EDU research humanoid delivered with a pair of Inspire RH56DFQ five-finger hands. Fast five-finger hand: 6 DoF and 12 joints, about 0.5 kg; four-finger flexion up to 570°/s, thumb swing 235°/s; ± 0.2 mm repeatability; integrated position and force sensing. With the hands the robot has 43 degrees of freedom. Everything else is the H2 EDU: the 182 cm, 31-joint biped with two onboard computers, secondary development and the SDK, under a 12-month manufacturer warranty.

Standing 182 cm and weighing about 70 kg, the H2 EDU carries 31 degrees of freedom — 6 in each leg, 7 in each arm, 3 in the waist and 2 in the head — on low-inertia, high-speed internal-rotor motors and industrial-grade crossed roller bearings. The arm joints deliver up to 120 N·m and the leg joints 360 N·m, for an arm payload of about 7 kg rated and 15 kg peak. A wide-field binocular camera, an array microphone and a high-power speaker give it vision and voice interaction; a quick-release 15 Ah smart battery runs it for about 3 hours.

What makes it the research edition: an Intel Core i7 development computer next to the Core i5 motion computer, secondary development with Unitree's SDK and development guide, and slots for an optional NVIDIA Jetson Thor (2070 TFLOPS, 128 GB) or Jetson Orin NX module. The back panel carries six USB-C ports, a GMSL video input, two gigabit Ethernet ports, four power outputs with RS-485 or CAN and two dexterous-hand connectors. Unitree's motion-control algorithms keep evolving through OTA updates, and the H2 EDU carries a 12-month manufacturer warranty.

Unitree positions the H2 EDU for locomotion, whole-body control and learning research, education and training, embodied-AI development and the exploration of industrial scenarios. Unitree advises keeping a safe distance from the robot in operation, using it at 0–40 °C on firm, dry ground, and understanding the platform's limitations before buying.

The standard Unitree H2 is the same body without the development computer, SDK or hand options. The eight EDU SMART packages differ only in the pair of hands fitted: A Dex1-1 grippers, B Dex3-1, C Dex3-1 Tactile, D Dex5-1, E Dex5-1P Tactile, F BrainCo Revo 2 Basic, G BrainCo Revo 2 Touch, H Inspire RH56DFQ.

Features

Inspire RH56DFQ hands fitted Fast five-finger hand: 6 DoF and 12 joints, about 0.5 kg; four-finger flexion up to 570°/s, thumb swing 235°/s; ± 0.2 mm repeatability; integrated position and force sensing.
Built for development An Intel Core i7 development computer (10 cores, 16 or 32 GB) beside the Core i5 motion computer, with secondary development and Unitree's SDK and development guide.
Room for a 2070 TFLOPS AI module Optional NVIDIA Jetson Thor (128 GB) or Jetson Orin NX (100 TOPS) modules slot in as PC3 and PC4 for embodied-AI models.
Full-size, human proportions 1820 mm standing, about 70 kg; 1045 mm legs and 690 mm arms in aircraft-grade aluminium, titanium alloy and engineering plastics, with a bionic head and facial features.
31 degrees of freedom 6 in each leg, 7 in each arm, 3 in the waist and 2 in the head on low-inertia PMSM motors and industrial-grade crossed roller bearings; 120 N·m arm and 360 N·m leg joints, about 7 kg rated arm payload.
Sees, hears and speaks A wide-field binocular camera (2064 × 1552 px, 156° × 116°), an array microphone and a high-power speaker; Wi-Fi 6 and Bluetooth 5.2.
Quick-release smart battery 15 Ah, 0.972 kWh, about 3 hours per charge; the charger refills it in about 2 h 40 min.
Open back panel Six USB-C ports, a GMSL video input, two gigabit Ethernet ports, four power outputs with RS-485 or CAN and two dexterous-hand connectors.

Specs

Model	H2 EDU SMART H
Brand	Unitree Robotics
Robot type	Full-size bipedal humanoid, research edition
Height × width × depth, standing	1820 × 456 × 218 mm
Weight, with battery	About 70 kg (hands extra)
Body degrees of freedom	31 (31 joint motors)
Per leg · per arm · waist · head	6 · 7 · 3 · 2
Arm joints	Shoulder 3, elbow 2, wrist 2
Leg joints	Hip 3, knee 1, ankle 2
Bionic head with facial features	Yes
Joint output bearing	Industrial-grade crossed roller bearings
Joint motor	Low-inertia, high-speed internal-rotor PMSM
Maximum arm joint torque	120 N·m
Maximum leg joint torque	360 N·m
Arm payload	About 7 kg rated, about 15 kg peak
Calf + thigh length	1045 mm
Forearm + upper arm length	690 mm
Materials	Aircraft-grade aluminium, titanium alloy, high-strength engineering plastics
Cooling	Local air cooling
Battery	Quick-release smart battery, 15 Ah, 0.972 kWh; 64.8 V rated, 75.6 V maximum
Battery life	About 3 hours
Charger	100–240 V input; 76.5 V, 2–6.6 A output (about 499 W); full charge in about 2 h 40 min
Remote control	R3 handheld joystick remote: data-transmission module and Bluetooth, over 100 m in an open environment, about 5 h per charge, emergency stop
Motion-control computer (PC1)	Intel Core i5, 10 cores, 8 GB, 500 GB
Development computer (PC2)	Intel Core i7, 10 cores, up to 4.8 GHz, 16 or 32 GB, 500 GB
Optional AI modules	PC3 NVIDIA Jetson Thor T5000 (2070 TFLOPS FP4, 128 GB, 2 TB) · PC4 NVIDIA Jetson Orin NX 16 GB (100 TOPS, 2 TB)
Secondary development	Yes: Unitree SDK and H2 development guide
Vision	Humanoid binocular camera: two global-shutter RGB sensors, 2064 × 1552 px, 156° × 116° field of view, 60 mm baseline
Voice	Array microphone and high-power speaker
Connectivity	Wi-Fi 6, Bluetooth 5.2; two gigabit Ethernet ports
Back panel	Six USB-C ports, one GMSL video input, two gigabit Ethernet ports, four GXT30 power outputs with RS-485 or CAN (12 V, 24 V, direct battery; 500 W in total), two dexterous-hand connectors
Mounting	M6 threaded holes on the back, 176 × 150 mm and 100 mm spacing
Software updates	Intelligent OTA
Operating conditions	0–40 °C, firm dry ground; not waterproof or dustproof
Warranty	12 months, per Unitree's published terms
Hands fitted	2 × Inspire RH56DFQ five-finger hand
Fingers · DoF per hand	5 fingers · 6 (12 joints)
Robot DoF with hands	43
Hand sensing	Integrated position and force sensing
Hand grip and load (maker's figures)	Fast fingers: four-finger flexion up to 570°/s, thumb swing 235°/s; ± 0.2 mm repeatability
Weight per hand	≈ 0.5 kg
In the box	Remote controller, battery, battery charger, protective stand, lying-posture packaging case, waist calibration blocks A and B, hip calibration fixtures A and B, ankle calibration fixtures (2), IMU calibration fixture, specialised lanyard, front and rear foot airbags (4 + 4), M4 × 20 screws (4), M4 hex wrench, level, XT30-M connectors (6), power connectors (4); the two hands and their fittings — hand edition, wrist cameras and software options confirmed with your quotation

Industries

Research
Education
Entertainment
Industrial

Product Brochure

Unitree H2 EDU SMART H Humanoid Robot with Inspire RH56DFQ Hands – Product Brochure

The Robotix Market brochure with every capability and the full technical specification — to save, print or forward.

PDF · A4 · Robotix Market

Download Brochure (PDF)

Frequently Asked Questions

How much does the Unitree H2 EDU SMART H cost?

The Unitree H2 EDU SMART H is priced at $83,860 in your market. For volume or project orders, contact us for a business quote.

What is included with the Unitree H2 EDU SMART H?

Unitree's H2 user manual lists: remote controller, battery, battery charger, protective stand, lying-posture packaging case, waist calibration blocks A and B, hip calibration fixtures A and B, ankle calibration fixtures (2), IMU calibration fixture, specialised lanyard, front and rear foot airbags (4 + 4), M4 × 20 screws (4), M4 hex wrench, level, XT30-M connectors (6), power connectors (4).

The SMART H package adds a pair of Inspire RH56DFQ five-finger hands and their fittings; hand edition, wrist cameras and software options are confirmed with your quotation.

What hands does the SMART H have?

A pair of Inspire RH56DFQ five-finger hands. Fast five-finger hand: 6 DoF and 12 joints, about 0.5 kg; four-finger flexion up to 570°/s, thumb swing 235°/s; ± 0.2 mm repeatability; integrated position and force sensing.

What does the H2 EDU add over the standard H2?

The body is identical. The H2 EDU adds an Intel Core i7 development computer, secondary development with Unitree's SDK and development guide, dexterous-hand options and optional AI modules (NVIDIA Jetson Thor or Jetson Orin NX), and carries a 12-month warranty instead of 8. The standard Unitree H2 runs on its Core i5 motion computer without secondary development.

How do the EDU SMART packages differ?

Only in the pair of hands fitted: A Unitree Dex1-1 grippers, B Dex3-1 three-finger, C Dex3-1 Tactile, D Dex5-1 five-finger, E Dex5-1P Tactile, F BrainCo Revo 2 Basic, G BrainCo Revo 2 Touch, H Inspire RH56DFQ. The robot, computers and accessories are the same H2 EDU in every package; the brochure on this page compares the hands side by side.

Can I program the H2 EDU?

Yes. The H2 EDU supports secondary development: your software runs on the Intel Core i7 development computer (and on an optional Jetson Thor or Orin NX module), with Unitree's SDK, the H2 development guide, gigabit Ethernet and the back-panel interfaces. The motion-control computer itself is not open.

How long does the battery last and how is it charged?

The quick-release 15 Ah smart battery (0.972 kWh) gives about 3 hours of use. The charger takes 100–240 V and refills it in about 2 hours 40 minutes; the first charge takes the battery out of shipping mode.

What warranty does it carry?

Unitree's published warranty for the H2 EDU is 12 months. Every robot ships with the manufacturer warranty and official documentation; support is coordinated with Unitree's service network.

Do you ship worldwide?

Yes. Robotix Market ships worldwide; delivery, import duties and the delivery estimate to your address are confirmed with your quotation.

Unitree Robotics

Unitree H2 EDU SMART H Humanoid Robot with Inspire RH56DFQ Hands

Regular price: $83,860.00
Sale price

Unit price

H2 EDU research humanoid with a pair of Inspire RH56DFQ five-finger hands (5 fingers · 6 (12 joints) per hand, 43 DoF in total): 182 cm, Core i5 + Core i7 with SDK, 3-hour smart battery; 12-month warranty.

In Stock

OriginChina

Warranty12 months

SKUUnitree-H2-EDU-SMART-H

Lịch sử giá

Lịch sử giá trung bình

Mỗi ngày có một điểm dữ liệu, tính trung bình theo ngày ghi nhận.

Giá trung bình hằng ngày

Số tiền bằng USD

$83.860

Giá trung bình được tính theo ngày UTC từ tất cả giá chào bán đã ghi nhận.

Tin đăng liên quan

Unitree H2 EDU SMART B Humanoid Robot White

Unitree

$82.160

Unitree H2 EDU SMART C Humanoid Robot Silver

Unitree

$84.160

Unitree H2 EDU SMART F Humanoid Robot White

Unitree

$80.160

Unitree H2 EDU SMART G Humanoid Robot Silver

Unitree

$84.160

Unitree H2 EDU SMART H Humanoid Robot White

Unitree

$83.860

Unitree H2 EDU SMART I Humanoid Robot Silver

Unitree

$87.860

Unitree H2-A Standard K Humanoid Robot Silver

Unitree

$83.500

Unitree H2-D Standard E Humanoid Robot Silver

Unitree

$76.800

Unitree H2-D Standard J Humanoid Robot Silver

Unitree

$82.800

Unitree H2-D Standard M Humanoid Robot Silver

Unitree

$78.300

Unitree H2-D Ultimate C Humanoid Robot Silver

Unitree

$75.800

Unitree H2-D Ultimate D Humanoid Robot Silver

Unitree

$88.800